SIMPLE TO SET-UP WITH LASERPRECISION.
Attach the tool to the rear sprocket, check alignment alongthe length of the chain or between sprockets, adjust as required re-check toverify correct alignment and you\'re done.
The body of the tool is CNC machined aluminum which is protected with a beautiful black anodized coating. The keyfeatures of the machined body are the laser hole and the clamp leg face. Bothare machined in the same set up to ensure a coplanar relationship is maintainedbetween both. As the leg of the clamp sits flush on the sprocket during use thecenterline of the laser will follow accordingly.
The laser is nested in the clamp body and activates by useof an on off push switch. There is also a cylindrical pocket machined into theclamp body which is used to house spare batteries. The tool assembly alsoconsists of a screw sub assembly. The screw tip material is nylon, chosen so itwill not scratch the sprocket face during set-up and use.
During assembly the alignment is checked over distance on aprecision ground fixture and is factory certified, no adjustment is required bythe user.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.