Land Rover Discovery 2 – Integrated Spare Wheel Reversing Camera Kit

A cleaner, more integrated reversing camera solution for the Land Rover Discovery 2.

Designed specifically for the Discovery 2, this kit incorporates a reversing camera into a custom-designed housing that fits inside the centre opening of the rear-mounted spare wheel.

Rather than attaching a camera externally or using a flimsy aftermarket bracket, the camera is neatly integrated into the spare wheel assembly for a discreet, practical installation, with camera giving optimal view of where your rear bumper is and whats around you.

The result is a much cleaner appearance while providing improved rear visibility when reversing.

• Integrated 720P HD reversing camera

• 170° wide-angle viewing.

• Starlight night vision for improved low-light visibility vs inexpensive infared cameras

• AHD / CVBS dual video signal, switchable to suit compatible displays.

• Dynamic parking guidelines that move with steering input.

• Waterproof camera.

Please note: The dynamic parking guidelines are indicative only. Although they move with steering input, they are not precisely calibrated to the Discovery 2\'s steering geometry or actual vehicle trajectory. Do not rely on them as an accurate representation of the vehicle\'s path.

Everything required for the camera housing and installation is supplied:

• 720P HD reversing camera.

• All required camera wiring and connections (ensure your monitor can connect to this camera).

• Mounting screws and hardware.

• Rubber grommets for cable routing and protection.

• Installation hole template.

• Camera wiring & installation instructions & tips.

This kit requires some mechanical knowledge and basic automotive electrical experience.

Installation involves:

• Removing the spare wheel for access.

• Drilling mounting holes in the spare wheel mounting assembly.

• Drilling a concealed cable-routing hole hidden behind the rear tail light.

• Installing the camera housing and securing the supplied hardware.

• Routing the camera wiring and connecting it to a compatible reversing camera input on your head unit or monitor.

A hole-positioning template is included to assist with installation.

The additional cable-routing hole is concealed behind the tail light once installed.

This is not a plug-and-play installation. Buyers should be comfortable with basic drilling, mechanical assembly and automotive wiring, or have the installation completed by a suitably experienced installer.

Please check compatibility before purchasing.

The supplied camera supports switchable AHD 720P and CVBS video signals.

Your existing head unit or monitor must support the selected video signal format and resolution.

Not all aftermarket head units, reversing camera monitors or factory displays support AHD 720P.

Please confirm your display\'s camera input specifications before ordering. An appropriate display or signal-compatible head unit may be required.

Designed for the Land Rover Discovery 2 (1999–2004).

Please check your spare wheel mounting arrangement before purchasing.

• Drilling and permanent modification of the spare wheel mounting assembly are required.

• Check all mounting positions and cable clearances before drilling.

• This product is an aftermarket accessory and is not manufactured by or affiliated with Land Rover.

A practical, purpose-designed reversing camera solution for the Discovery 2, integrating the camera neatly into the factory spare wheel location.