LInear DT Compatible Two Button Stinger Remote 310MHz
$13.76

CONTENTSThe Stinger transmitter is a very small (1-5/8\" x 3\" x 1/2\") Two-Button visor style remote operating at 310 MHz. The Stinger achieves its small size by using state-of-the-art, surface mount components. It has been designed for use with; LInear Delta 3 gate and garage door eceivers.
CODINGAccess to the Stinger\'s toggle code switch is achieved by sliding down the front cover. Set the EIGHT-digit toggle code switch to match the code set in the receiver. Move switches using a small pointed object, such as a paper clip. Gently switch the small switches to either + or - positions. When complete slide front cover back into position
OPERATIONOnce the codes are set to match the transmitter codes, you may test the system. Ensure the gate or door is visible and clear before testing. Step 1- Push the Stinger\'s button from a distance of about ten feet. If the receiver activates, the switches are properly set.Step 2- Test the transmitter from several locations to discover any \"blind spots\" caused by interference.
BATTERY ACCESSSlide front cover down to reach battery compartment. Be aware of battery polarity when replacing the A23 battery.
TECHNICAL SPECIFICATIONSOperating Frequency- 315 MHzNumber of Buttons- 2Battery- 1 ea. 12V A23Number Combinations- Lots :-)Operating Temperature- -20F - 100FOverall Dimensions- 1/2\" x 3\" x 1-5/8\"Weight- 1 oz.
COMPATIBLE REMOTE\'SLinear: Delta3, DT, DTC & DTD Inventory Software and Automated Listing Powered By:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.