LG 4779ER3002A Washing Machine Leveling Leg
Genuine OEM Front-Load Clothes Washer Adjustable Heavy-Duty Leveling Leg & Foot Assembly
🛑 STOP: Please contact us with your model number to verify compatibility before purchasing.
📝 Product Overview
The LG 4779ER3002A (also cross-referenced under factory part numbers 4779ER3002C, 4779ER3002D, and AGM73113101) is a factory-original replacement clothes washer leveling leg assembly. Designed for select LG and Kenmore Elite front-load and top-load washing machines, this heavy-duty adjustable foot threads directly into the reinforced corner mounting brackets of the washer base frame to provide solid cabinet support, precise height adjustment, and floor stabilization.
As an Authentic LG Factory Component, this leveling leg is constructed with a high-tensile zinc-plated steel threaded stud bonded to a non-marring, heavy-density molded rubber foot pad. It is engineered to absorb extreme vibrational energy during 1300+ RPM high-speed extraction cycles, dampening sound transfer and resisting chemical breakdown from floor detergents, water splashes, and high humidity. Choosing a genuine factory OEM leveling leg guarantees exact metric thread engagement, high load-bearing strength, vibration-resistant locking, and dependable long-term protection against violent machine walking, out-of-balance banging, and uneven cabinet rocking.
🔍 Signs Your Washer Leveling Leg Needs Replacement
- Washer \"Walks\" or Migrates Across the Floor: A missing, damaged, or unlevel leg causing the machine to vibrate excessively and wander during high-speed spin cycles.
- Violent Shaking, Thumping, or Cabinet Rocking: Uneven floor contact allowing one corner to lift and slam downward as the spin basket accelerates under load.
- Bent, Stripped, or Cross-Threaded Metal Stud: Physical impact during appliance moving or dropped loads bending the threaded bolt, making height adjustment impossible.
- Cracked, Missing, or Deteriorated Rubber Foot Pad: Long-term weight and vibration tearing the rubber pad away from the metal plate, exposing bare steel that scratches flooring.
- Persistent \"uE\" or \"UE\" (Unbalanced Load) Fault Codes: Unstable cabinet leveling tripping the internal 3D vibration sensor and preventing the washer from ramping up to full spin extraction speed.
🔧 Technical Specifications
- Part Number: 4779ER3002A (Verify exact washer model cross-reference prior to purchase)
- Part Type: Clothes Washer Adjustable Heavy-Duty Leveling Foot & Stud Assembly
- Construction Materials: Zinc-Plated Carbon Steel Threaded Shaft with Molded Anti-Slip Rubber Base
- Mounting Position: Front or Rear Base Frame Corner Bracket Receptacles
- Brand Compatibility: Precision engineered to fit select LG and Kenmore Elite washing machines.
📦 Professional Care, Handling & Safety Tips
⚠️ CAUTION: APPLIANCE WEIGHT HAZARD & PINCH RISK! DISCONNECT POWER BEFORE SERVICING! Unplug the washer from the 120V electrical outlet before servicing. Front-load washers weigh upwards of 200 lbs; never attempt to tilt or prop the washer alone—always use a sturdy wooden block or an assistant to hold the cabinet when accessing the feet. Never put hands or fingers directly beneath the frame while tilting. How to verify success: Place a bubble level across both the front-to-back and side-to-side planes on top of the washer lid, press diagonally down on opposite corners to verify zero wobble, tighten the locking nuts firmly against the chassis base, and run a test high-speed spin cycle with an empty tub to confirm whisper-quiet, steady operation with no cabinet movement. Pro Tip: Lock the Jam Nut Tight Against the Frame & Clean Receptacle Threads! After adjusting your new **LG 4779ER3002A** leveling leg to the perfect height, always use a wrench to tighten the upper hex jam nut firmly upward against the washer’s bottom frame flange; this locks the threads solid and prevents operational vibrations from loosening the leg over time. Clean out any lint or rust from the base bracket threads before screwing the new leg in. Installation Steps: Unpack your genuine **LG 4779ER3002A** washing machine leveling leg onto a clean workspace. Disconnect electrical power to the washer. Carefully tilt the washer back slightly and support the front corner securely with a solid wooden block or prop. Use an adjustable wrench to loosen the upper lock nut on the damaged leg, then unscrew the entire threaded stud counter-clockwise to remove it from the base bracket. Clean the mounting hole threads, thread the lock nut onto the new **LG 4779ER3002A** stud, and screw the new leg into the corner bracket by hand. Lower the washer back down to the floor, check with a bubble level, adjust leg height with a wrench until all four feet make firm, even contact with the floor, lock the jam nut tightly against the frame base, restore electrical power, and run an operational spin cycle.
** Please contact us with your model number to verify compatibility before purchasing. **
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.