New Generation 4 (March, 2023)
-Higher Output (Max 600 Lumens)
-Able to use 3.7V Rechargeable Battery Setups when used on M3X
***Do NOT use 3.7V Rechargeable Batteries on models with laser and/or IR units***
LED drop-in upgrade module for the Insight/Streamlight/EOTech M3X, M6X, LAM-100 Series, LAM-1000 Series, AN/PEQ-6A ILLM, AN/PEQ-6, AN/PEQ-14 ILWLP, AN/PEQ-16, AN/PEQ-16A.
No modifications necessary, just switch the old incandescent lamp assembly out with this LED module. Full drop-in and reversable to incandescent stock at anytime.
Recoil Dampening Spring, Reverse Polarity and Thermal Warning Protection.
SIMX-LED High OutputSingle Mode LED Tower Module
(6V-9V Regulated Output)-HighOutput Nichia 519A LED (Max Output 600 Lumens)
-6V-9V Regulated Output
-MaximumCurrent Output at 1200mA
-Cool White, Cool Colour Temperature (5700K)
-Direct Thermal Copper MCPCB
-Fully Potted Internal Components
-Reverse Polarity Input Protection
-Over-Discharge Protection
-PrecisionMachined Aluminum Lamp Assembly
-EveryLamp Assembly is Pre-Focused for the Ultimate Spot
-Built-inReverse Polarity Protection
-Built-inThermal Protection Warning
-Recoil Dampening Spring
New All Aluminum Head Bezel Unit for the M3X and M6X is available to replace the worn-out stock plastic Head Bezel for optimal performance, available separately:
M6X (Incandescent Model)
***Do NOT use 3.7V Rechargeable Batteries on models with laser and/or IR units***
***This LED upgrade module is ONLY Compatible with Incandescent Version of M3X and M6X***
AN/PEQ-6A ILLM (Light Module, Integated Laser)
AN/PEQ-16
AN/PEQ-16A (Incandescent Version)
(This product does NOT fit the AN/PEQ-16B that use LED as light source)
LAM-100, LAM-150
LAM-200, LAM-250
LAM-300, LAM-350 (H&K USP)
LAM-400, LAM-450 (H&K Mark 23)
LAM-1000 (AN/PEQ-14 ILWLP)
LAM-1150
LAM-1200, LAM-1250
LAM-1300, LAM-1350 (H&K USP)
LAM-1400 (Mark 23 AN/PEQ-6)
LAM-1450 (H&K Mark 23)
And all lights using the Insight/Streamlight/EOtech CFL-120 lamp module.
***Do NOT use 3.7V Rechargeable Batteries on models with laser and/or IR units***
***NOT Compatible with M2 UTL, M3, M3-LED, M4, M4-PRO, M5, M6 TLI***
***NOT Compatible with AN/PEQ-16B***
***This LED upgrade module is ONLY Compatible with Incandescent Version of M3X and M6X***
***This listing is for the LED upgrade module ONLY, all flashlights in the photos are for reference use ONLY and NOT included in this listing.***
Runtime:2 xCR123A Primary Cells: ~2 hours
2 x 16340 (RCR123) 3.7V Rechargable Cells: ~ 1.2 hours
***Do NOT use 3.7V Rechargeable Batteries on models with laser and/or IR units***
***Heat Warning: This is a high output LED module that produce excessive heat. Do not operate constantly for more than 20 mins to avoid overheating.***
For the M2 UTL, M3, M3-LED, M4,M4-PRO, M5, M6 TLI replacement LED module, follow the link below:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.