Features and Benefits
Usage : Placed on the door, kitchen, safe case, wardrobe,
1. When
the power is turned on, the light does not light. Solution: A. Check the
polarity of the battery installation. B. When the ambient light is too
bright, the lamp is in standby mode. C, the battery is not charged, please
replace the battery.
2. When
the power is turned on, the LED light flashes. Solution: A, the host needs
one to two minutes to stabilize the internal circuit, B, the battery may be
low, please replace the battery.
Please allow
1-5mm errors due to manual measurement.
Do not place the
product in a position facing the glass door or where the temperature changes
drastically.
Because of this
type of product that uses an infrared sensor, it requires a relatively
stable environment.
Please keep the
lamp away from the monitor and TV.
Please pay
attention to the temperature and humidity of the working environment,
otherwise the battery life will be affected.
Use a good
quality LR06 (AA) No. 5 battery or rechargeable battery.
After the light
goes out, a delay of 6-8 seconds, then works again.
LED lights should
not directly target people\'s eyes, especially children.
When installing
the product, do not install it in a place that is easy for children to
avoid, so as to avoid accidents for children.
Item color
displayed in photos may be showing slightly different on your computer
monitor since monitors are not calibrated the same.
Please note that
The battery is not included in the package
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.