LCD Keypad Shield LCD 1602 Display Blue Screen Module For Arduino

Package:
1 LCD1602 Input / Output expansion board LCD Keypad ShieldFeatures:
A specially designed dot matrix LCD module which is used for displaying letters, numbers and symbols etc.
Consists of several 5X7 or 5X11 other dot matrix character bits. The interval exists between each line or each bit to create a good character spacing and row spacing effect.
Based on HD44780 LCD chip and adopts standard 16-pin interface.
It has a contrast adjustment knob, backlight selection switch, but also with four directional buttons, a selection button and a reset button.
This 1602 LCD expansion board in the true sense of the circuit will be simplified, directly to the board inserted for Arduino Duemilanove controller can be.Product description
1602 LCD module read and write operations, screen and cursor operations are programmed to achieve through the instructions.
Note: 1- High level, 0 -Low level）
Instruction1: clear display, instruction 01H, cursor reset to address 00H position.
Instruction 2: The cursor is reset and the cursor returns to address 00H.
Instruction 3: Cursor and display mode setting I / D: cursor movement direction, high level shift right, low left shift S: whether all the text on the screen left or right. High level is valid, low level is invalid.
Instruction 4: Display switch control. D: control the overall display of the open and close, high level that open display, low level that off display C: control the cursor on and off, high level that has a cursor, low level that no cursor B: control whether the cursor Flashing, high level flashing, low level does not blink.
Instruction 5: Cursor or display shift S / C: Move the displayed text at high level, move the cursor at low level.
Instruction 6: Function setting command DL: 4-bit bus at high level, 8-bit bus at low level N: Single-line display at low level, double-line display at high level F: 5x7 dot matrix character when low level is displayed, High-level display of 5x10 dot matrix characters.
Instruction 7: Character generator RAM address setting.
Instruction 8: DDRAM address setting.
Instruction 9: read busy signal and cursor address BF: busy flag, high level that busy, then the module cannot connect Receive the command or data, if the low level that is not busy.
Instruction 10: Write data.
Instruction 11: Read data.ContactUs

(1) Westrive to provide the best service as possible, commit to resolve all problemsand give fast shipping.
(2) Please contact us before giving anynegative response. If you have any questions, please do not hesitate tocontact us.

Payment
(1) All paymentsmust be prepaid and cleared.
(2) We only accept Paypal payment. Aftercheckout, please make through Paypalservice.

Shipping

(1) Buyer is responsible for anyincorrect address and undeliverable address. We reserve the right to charge the shipping fee again for returned items due to
wrong address.We take the paypal address as your shipping address.Please make sure your shipping address is correct during checkout.
(2)Your order will be shippedwithin 24 hours after payment is cleared(Sat. & Sun.excluded and holidays)
(3) We ship orders using USPS (United StatesPostal Service). The shipment usually takes 2-4 business days, excludingholidays, Saturday and Sunday
(4) Local pick up is notavailable.
(5) No This product has a 30-daywarranty.
(2) Warranty does not extended to any products that arebuyer\'s negligence, abuse, misuse, improper installation or physicallydamaged on the buyer or user\'s part.
(3) Please contact us before making areplacement or refund.
(4) In case of returning, buyer must pay their ownpostage and shipping fees for replacement or refund. We will providereplacement or refund after product is received.