LB02A Process Calibrator
Color LCD signal source and multimeter for industrial calibration 🔧
Key FeaturesMulti-Signal Output
4-20mA, 0-10V, mV, frequency up to 10kHz, thermocouple (K, J, B, S, T, N, E, R) and RTD (PT100, PT1000, Cu50) simulation.
Color LCD with Backlight
Clear color display with backlight and battery status bar. Enter any value directly with the keypad.
Pocket Size
Compact 120x76x30mm body with a built-in 2200mAh rechargeable battery 🔋 for field use.
Protected Circuits
Four PPTC devices and a quick-break fuse protect against Output0-11V, accuracy 0.025%+1mV Output0-110mVCurrent Output0-24mA, active or passiveFrequency0-10kHzResistance Output20-400 ohmRTD Pt100-200 to 850 CThermocouple K-200 to 1370 CMeasurement0-30V, 0-30mA, 0-150mV, 0-999.9 ohmLoop Power24V fixedPowerBuilt-in 2200mAh rechargeable battery, USB chargingPackage Contents
1 x Calibrator
1 x Pair of test leads
1 x USB cable
1 x Carrying box
1 x Manual
ImagesFAQCan it measure as well as output signals?
Yes. It works as a signal source and as a simple digital multimeter for V, mV, mA, ohm, thermocouple and RTD.
How is it powered?
By the built-in 2200mAh rechargeable battery, charged over USB.
Is there a carrying case?
Yes, a carrying box is included.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.