Specifics and features:Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.It is a design of a full electronic closed loop control. LABLT Governor Speed Controller For Generator KTA50 KTA38 KTA19 Engine 3062322
Specifics and features:
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFC electronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Package includes:
1 × Generator Speed Controller
Notes:
We strongly recommend professional installation.
If you are unsure whether the product is suitable for your equipment, please contact us promptly before purchasing to confirm.
Due to the fact that all detailed dimensions of the product are manually measured, please allow for measurement errors.
Due to lighting issues during photography, the product images in the link may not reflect the actual color of the item.
Thank you for collecting our store and looking forward to working with you.
Item SpecificsCountry of Origin United StatesBrand LABLTModel EFC3062322MPN QS704256QRType Speed ControllerWarranty 1 YearOperating Voltage 12 or 24 volts ±20%Steady State Speed Band ±0.25%Ambient Operating Temperature -40℃ to 85℃Custom Bundle NoBundle Description NoModified Item NoTemperature Stability Better than ±0.5% over temperatures of -40℃ to 125℃Enclosure Die cast aluminumWeight 635 grams (1.4 lbs.)Magnetic Pickup Frequency Range 2500 - 5000 HzOutput Signal PWM current to 6A at max.Actuator Compatibility EFC3408326, DYNA7000Fitment Type Direct Replacement
Payment
All items will be shipped to buyer's address. Please make sure your address in matches the address you would like us to ship to before payment.
Easy Return
If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/ costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.
If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.
Important Notice:
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
3. We will not accept responsibility for loss or damage of goods during transit, please ensure that.
Warranty
Most of the products have warranty .In the very unlikely event that you have a problem with our product, please contact us via messages.
response
We aim to maintain high standards of service and strive to achieve 100% customer satisfaction!
Your response is very important to us, and we sincerely hope that you can contact us immediately before providing us with neutral or negative response, so that we can solve your problem satisfactorily.
LABLT Governor Speed Controller For Generator KTA50 KTA38 KTA19 Engine 3062322
Specifics and features:
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFC electronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Package includes:
1 × Generator Speed Controller
Notes:
We strongly recommend professional installation.
If you are unsure whether the product is suitable for your equipment, please contact us promptly before purchasing to confirm.
Due to the fact that all detailed dimensions of the product are manually measured, please allow for measurement errors.
Due to lighting issues during photography, the product images in the link may not reflect the actual color of the item.
Thank you for collecting our store and looking forward to working with you.
Payment Shipping
All items will be shipped to buyer's address. Please make sure your address in matches the address you would like us to ship to before payment.
Easy Return
If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/ costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.
If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.
Important Notice:
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
3. We will not accept responsibility for loss or damage of goods during transit, please ensure that.
Warranty
Most of the products have warranty .In the very unlikely event that you have a problem with our product, please contact us via messages.
response
We aim to maintain high standards of service and strive to achieve 100% customer satisfaction!
Your response is very important to us, and we sincerely hope that you can contact us immediately before providing us with neutral or negative response, so that we can solve your problem satisfactorily.
All rights reserved.
Shop CategoryStore Home Auto Actuator◈AC Blower Motor◈Air Conditioner Actuator◈Clutch Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Fuel Door Opener Actuator◈Hood Catch Auto Circuit Wiring Harness◈Airbag Hairspring◈Battery Terminal◈Body Wiring Harness◈Carplay◈Gear Shift Control Cable◈Positive Battery Cable◈Sensor Harness Auto Engine System◈Coolant Water Inlet Pipe◈Engine Hood◈Engine Timing Cover◈Filter Housing &Accessories◈Glow Plug◈Oil Cooler◈Oil Pan◈Oil Cover◈Valve Cover & Gasket Auto Hub◈Hub Bearing◈Locking Hub◈Wheel Spacers Adapters Auto Ignition System◈Car Ignition◈Car Ignition Coil◈Car Ignition Module◈Ignition Switch◈Spark Plug◈Spark Plug Protective Cover Auto Inlet & Outlet System◈Exhaust And Intake Pipes◈Intake Exhaust Valves◈Throttle Body◈Turbocharger Auto Interior◈Air Conditioner Vent◈Armrest Center Box Cover◈Cigarette Lighter◈Cup Holder◈Inner Door Panel Handle◈Inside Door Handle◈Plastic Rivets Fasteners◈Storage Box◈Sunroof Sunshade Corn◈Trunk Shield Auto Motor Auto Pump◈Air Pump◈Fuel Pump◈High Pressure Fuel Pump◈Oil Pump◈Power Steering Pump◈Water Pump Auto Sensor◈ABS Wheel Speed Sensor◈Air Pressure Sensor◈Camshaft Position Sensor◈Coolant Temperature Sensor◈Crankshaft Position Sensor◈Exhaust Pressure Sensor◈Fuel Pressure Sensor◈Knock (Detonation) Sensor◈MAP Sensor◈Mass Air Flow Sensor◈Oil Pressure Sensor◈Oxygen Sensor◈PDC Sensor◈Ride Height Sensor◈Throttle Position Sensor (TPS)◈TPMS Sensor◈Vehicle Speed Sensor Auto Switch◈Combination Lever Switch◈Door Power Window Switch◈Neutral Safety Switch◈Parking Brake Switch Auto Valve◈Air Idle Valve◈Control Valve◈EGR Valve◈Pressure Relief Valve◈Transmission Solenoids◈Valve Body Boat◈Steering Shaft Pin◈Yacht Light Brakes & Brake Parts◈ Brake Lines◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Motorcycle Hand Brake Handle Business & Bar♢Collet Chuck♢Drill Bits♢Drill Chuck♢Drill Chuck Arbors♢Edge Finder♢Live Center♢Milling Arbor♢Pull Stud♢Quick Change Tool Post♢Reamer♢Spring Materials♢Interior Door Fittings♢Paint Sprayers▷Generator Accessories♢Automatic Voltage Regulator▷Hand Tools♢Balance Level♢Casters♢Hydraulic Crimper♢Outside Micrometer♢Rivet Gun♢Wrenches▷Industrial Control Module♢Control Valves♢Roller Chain▷Metalworking Supplies♢Flap Disc♢Hose Clamp♢Metal Cut Off Wheels♢Sanding Disc♢Welding Wire◈Solar Panel Car Repair Kit Carburetor◈ATV Carburetor◈Automobile Carburetor◈Blower Carburetor◈Gaskets◈Intake Manifold Boot◈Lawn Mowers Carburetor◈Motorcycle Carburetor◈Rebuild kits◈Saw Carburetor◈Snow Blower Carburetor◈String Trimmers Carburetor◈Tractor Carburetor Control Arms & Parts Exterior Trimming Parts◈Bmuper Grille◈Door Handle◈Fender Flares◈Front Bumper◈Front Bumper Grille Guard◈Fuel tank cap◈Hinge◈Motorcycle Decoration◈Rear Bumper◈Roof Rack◈Running Boards/Side Steps◈Window Visors◈Windshield Wiper Blades Fuel Injector Home & Garden▷Chainsaw Parts♢Clutch & Accessories♢Cylinder▷Lawn Mowers Parts♢Air Filter♢Cable♢Deck Parts▷Snowblower Parts▷String Trimmer Parts♢Trimmer Head Lighting & Lamps◈Brake Lights◈Fog Lamps cover◈Fog Lights◈Headlight◈Moto Lighting & Lamps◈Tail Lights◈Truck Light Strip◈Turn Lights◈Xenon Headlight Ballast Motorcycle Control System◈Gearbox Shift Regulator Motorcycle engine system◈Camshaft◈Piston Cylinder Fittings Motorcycle Ignition System◈Motor Electromagnetic Starter◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting Motorcycle Pump◈Brake Calipers Motorcycle Valve◈Motorcycle fuel Switch Valve◈Motorcycle Solenoid Valve Other Radiators & Parts SuspensionHot Item LABLT Shut Off Solenoid For Deere/Kawasaki Replaces 21188-2011&M138477 X475 USD 9.11 LABLT Airless Paint Spray Gun 517 Spray Tip + Nozzle Guard for Sprayers 3600PSI USD 20.59 LABLT 3pack T25 Trimmer Head For Husqvarna 129L 129DJX 129R 129LK 128LDX Trimmer USD 15.26 LABLT For Zenith K2112 Carburetor Rebuild Kit For 61 67 68 161 Series USD 12.85 500W 36/48V Brushless DC Motor Speed Controller bike Scooter Electric Bicycle USD 16.07 New List Item LABLT Replacement For EFC 3044196 Electronic Speed Controller Governor 12-24V USD 32.41 LABLT Automatic Voltage Regulator EA05A Controller Fit For AVR EA05A 5 pack USD 143.69 LABLT For Generator Alternator Universal AVR EA16A Automatic Voltage Regulator USD 62.81 LABLT Automatic Voltage Regulator Controller AVR EA05A For Generator Genset USD 33.12 LABLT Engine Genset Controller HGM420N 4 Stroke Engine for Genset Automation USD 103.15
On Nov 17, 2026 at 01:38:28 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.