Description:Type: Generator Control ModuleModel: HGM1790N Engine Type: 4 Stroke LABLT Generator Control Module HGM1790N Gensets 24V 4 Stroke Engine For SmartGen
Description:
Type: Generator Control Module
Model: HGM1790N
Engine Type: 4 Stroke
Fuel Type: Diesel, Gasoline
Power Source: Fuel Powered
Recommended Uses For Product: Commercial, Residential
Voltage: 24 Volts
Special Feature: Remote Start
Color: Black
Engine Type: 4 Stroke
Ignition System Type: Electric start
Engine Displacement: 418 Cubic Centimeters
HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pumping unit). It can be started and stopped manually or via a remote start/stop signals. HGM1790N controller can supervise and protect genset operation by gathering and analyzing genset data like generate voltage, current, water temperature, oil pressure and so on, and graphical LCD monitor on the front panel displays fault conditions and provides effective alarm signals so as to do maintenance as soon as possible. Moreover, parameter threshold and delay value can be adjusted via front panel or USB port (communicated with PC software).
Pattern LCD display (with backlight), LED indicator, touch button operation;
The screen protection uses hard-screen acrylic materials;
Using silicone panels and buttons to adapt to high environmental and high temperature capabilities;
The power supply range is wide DC (8~35) V;
Collect and display single-phase voltage, current, frequency, power, and load percentage parameters: Power generation voltage V power generation frequency Hz; Power generation kW power generation current A; Load percentage %;
Various parameters of the precision acquisition engine: Oil pressure kPa temperature °C; Fuel level % cumulative running time H (up to 199999 hours); voltage V speed RPM; Cumulative boot times (up to 199999 times, displayed by the host computer);
Unit fault protection and display function;
The controller has 3 working modes: manual, automatic, and stop;
Multiple temperature, pressure and oil level sensors can be used directly and can customize parameters; temperature and pressure sensors can be separately and temperature, the pressure alarm is used in parallel to increase the primary protection while providing the analog quantity;
Multiple starting success conditions (speed, oil pressure, power generation frequency) can be selected;
1 programmable input port, which can be set as digital input or liquid level sensor;
2 relay fixed output ports (fuel output, start output);
3 programmable relay output ports, which can set public alarm output, preheat output or idle speed control output;
Parameter setting function: Allow users to change settings of their parameters, not lost when the system is powered off, most parameters of the controller can be adjusted from the front panel of the controller, and all parameters are adjusted by the PC through the USB interface (Type-B type);
All parameters are digitally adjusted to improve the reliability and stability of the whole machine;
Modular structure design, flame-retardant ABS shell, pluggable terminal block, embedded installation, compact structure and convenient installation.
Working Voltage: DC8. 0V to 35.0V. Continuous Power Supply
Power Consumption: <1.2W (Standby mode: s0.5W)
Alternator voltage Input: AC 15V -AC 30 V (ph-N)
Alternator Frequency: 5060Hz
Speed Sensor Voltage: 1.0V to 24V(RMS)
Speed Sensor Frequency: Max10KHz
Start Relay Output: 1Amp DC28V DC B+ power supply
Fuel Relay Output: 1Amp DC28V DC B+ power supply
Aux.Ouiput1: 1Amp DC28VDC B+ power supply
Aux.Output2: 1Amp DC28V DC B+ power supply
Aux.Ouitput3: 1Amp DC28V DC B+ power supply
Programmable input Digital: Active when connected to B-
Case Dimensions: 95mm × 86mm × 46.5mm
Panel Cutout: 78mm × 66mm
CT Secondary Current: Rated: 5A
Working conditions: Temperature: (-25-+70yC;Humidity:(20-93)%RH
Storage Condition: Temperature: (-25-+70yC
Protection Level: IP55: When waterproof rubber gasket installed between the controller and panel fascia.
insulation Intensity: Attach AC2.2kV voltage between AC high voltage terminal and low voltage terminal (leak current below 3mA in 1 minute).
Package Includes:
1 × HGM1790N Generator Control Module
About LABLT:
LABLT has rich experience in the production, sales and after-sales service of Industrial parts. For many years, we have been committed to providing professional and personalized services to enhance the shopping experience of buyers. If you need any parts, please come to LABLT to buy them. We look forward to cooperating with you!
Item SpecificsCountry of Origin United StatesBrand LABLTMPN OM398178OCFuel Type Diesel, GasolineType Generator Control ModuleWarranty 1YearModel HGM1790NPower Source Fuel PoweredCustom Bundle NoBundle Description NoModified Item NoSpecial Feature Remote StartRecommended Uses For Product Commercial, ResidentialEngine Displacement 418 Cubic CentimetersIgnition System Type Electric startEngine Type 4 Stroke
PAYMENT & DELIVERY
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders are posted by USPS or Fedex
WARRANTY INFORMATION
The most Products has months warranty .
The warranty does NOT cover damage of faulty Goods caused by: an accident or crash, damage caused in transit, damage cause by unauthorised repairs, improper installation of the Goods.
RETURN POLICY
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:
you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:
the Goods must be securely and appropriately packed so they are not damaged during transit;
the Goods must be returned in their original packaging;
the Goods must be like new and not show any signs of use or having been installed or fitted;
the claim for refund must be advised to us no later than 30 days after the date you bought the Good.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Suspension & Steering Lighting & Lamps◈Fog Lights◈Xenon Headlight Ballast◈Headlight◈Fog Lamps cover◈Turn Lights◈Brake Lights◈Truck Light Strip◈Moto Lighting & Lamps◈Others◈Tail Lights Carburetor◈Lawn Mowers Carburetor◈String Trimmers Carburetor◈Blower Carburetor◈Snow Blower Carburetor◈Saw Carburetor◈Tractor Carburetor◈Motorcycle Carburetor◈ATV Carburetor◈Automobile Carburetor◈Others◈Golf Carburetor◈Gasket◈Rebuild kit◈Intake Manifold Boot Boat◈Steering Shaft Pin◈Yacht Light◈Others Auto Valve◈Pressure Relief Valve◈Air Idle Valve◈VVT Valve◈Transmission Solenoids◈Control Valve◈Valve Body◈EGR Valve◈Others Motorcycle Valve◈Motorcycle Solenoid Valve◈Motorcycle fuel Switch Valve◈Others Fule Injector Brakes & Brake Parts◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Hand Brake Handle◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Others◈ Brake Lines Car Repair Kit Auto Engine System◈Valve Cover & Gasket◈Oil Cooler◈Engine Timing Cover◈Turbine Cover◈Oil Pan◈Automobile Heaters&Accessories◈Engine Coolant Recovery Tank◈Hydraulic Roller◈Glow Plug◈Filter Housing &Accessories◈Engine Rocker Arm Shaft Sleeve◈Engine Hood◈Oil Scale◈Coolant Water Inlet Pipe◈Others Auto Ignition System◈Spark Plug◈Car Ignition Coil◈Spark Plug Protective Cover◈Ignition Switch◈Car Ignition Module◈Others Auto Hub◈Locking Hub◈Hub Bearing◈Wheel Spacers Adapters◈Others Motorcycle Ignition System◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting◈Motor Electromagnetic Starter◈Others Motorcycle engine system◈Piston Cylinder Fittings◈Crankshaft◈Others Auto Actuator◈Air Conditioner Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Hood Catch◈AC Blower Motor◈Clutch Actuator◈Fuel Door Opener Actuator◈Others Auto Motor◈Transmission stepper motor◈Power Window Lift Motor◈Brake Caliper Servomotor◈Transfer Case Gear Motor◈Front Running Board Motor◈Blower Resistor◈Others Auto Inlet & Outlet System◈Air Filter◈Intake Exhaust Valves◈Throttle Body◈Power Brake Booster◈Exhaust And Intake Pipes◈Turbocharger◈Others Auto Circuit Wiring Harness◈Airbag Hairspring◈Positive Battery Cable◈Sensor Harness◈Body Wiring Harness◈Gear Shift Control Cable◈Battery Terminal◈Others Transmission Power Hose◈Others Auto Switch◈Door Power Window Switch◈Neutral Safety Switch◈Combination Lever Motorcycle Control System◈Gearbox Shift Regulator◈Thumb Oiler◈Others Auto Sensor◈TPMS Sensor◈Mass Air Flow Sensor◈Oxygen Sensor◈Knock (Detonation) Sensor◈Air Pressure Sensor◈Throttle Position Sensor (TPS)◈Vehicle Speed Sensor◈ABS Wheel Speed Sensor◈Fuel Pressure Sensor◈Crankshaft Position Sensor◈Oil Pressure Sensor◈Ride Height Sensor◈PDC Sensor◈MAP Sensor◈Exhaust Pressure Sensor◈Coolant Temperature Sensor◈Acceleration Sensor◈Others Motorcycle Pump◈Fuel Pump◈Brake Calipers◈Others◈Water Pump Auto Interior◈Plastic Rivets Fasteners◈Trunk Shield◈Sunroof Sunshade Corn◈Armrest Center Box Cover◈Cup Holder◈Inside Door Handle◈Inner Door Panel Handle◈Cigarette Lighter◈Storage Box◈Air Conditioner Vent◈Others◈Seat Covers◈Floor Mats Exterior Trimming Parts◈Roof Rack◈Running Boards/Side Steps◈Bmuper Grille◈Fender Flares◈Front Bumper Grille Guard◈Door Handle◈Fuel tank cap◈Hinge◈Front Bumper◈Rear Bumper◈Motorcycle Wiper Blades◈Window Visors◈Front bumper trim◈ Auto body trim panel Auto Pump◈Fuel Pump◈Water Pump◈High Pressure Fuel Pump◈Air Pump◈Power Steering Pump◈Clutch Master Cylinder◈Oil Pump◈Others Radiators & Parts Special Vehicles & Boats◈Go Kart Parts◈Excavator Parts◈Golf Cart Parts◈Boat Parts◈Snowmobile Parts◈Truck Parts Motorcycle Parts◈Motorcycle Carburetor Parts ATV&UTV Parts◈ATV&UTV Suspension System ◈ATV&UTV Brake System◈ATV&UTV Pump◈ATV&UTV Carburetor Parts◈ATV&UTV Body&Frame◈ATV&UTV Ignition System◈ATV&UTV Engine System◈ATV&UTV Intake&Exhaust System◈ATV&UTV Transmission System◈ATV&UTV Steering System◈ATV&UTV Control System◈ATV&UTV Switch◈ATV&UTV Sensor Industrial Bar♢Collet Chuck♢Drill Bits♢Drill Chuck♢Drill Chuck Arbors♢Edge Finder♢Live Center♢Milling Arbor♢Quick Change Tool Post♢Reamer♢Spring Materials♢Interior Door Fittings♢Paint Sprayers▷Generator Accessories♢Automatic Voltage Regulator♢Others▷Hand Tools♢Balance Level♢Casters♢Drill Bits♢Hydraulic Crimper♢Outside Micrometer♢Steel Tape Measure♢Rivet Gun◈Metalworking Supplies◈Industrial Control Module Home & Garden◈Chainsaw Accessories◈Lawn Mower Accessories◈Leafblower Accessories◈Snowblower Accessories◈String Trimmer Accessories◈Yard, Garden & Outdoor Living◈Others OtherHot Item LABLT Complete Carburetor For Traxxas 2.5 2.5r 3.3 Engine 4910 2.5 T-maxx & 4907 USD 17.48 Centrifugal Clutch 3/4\" Bore Belt Pulley Drive for Carter Go kart Mini Bike USD 24.10 LABLT (10) 1/4\" Straight In-Line Gas Fuel Shut-off / Cut-off Valves Petcock USD 7.78 LABLT Carburetor For Zama RB-K93 For Echo SRM-225 GT-225Air Filter Fuel Line Kit USD 12.69 Fuel Pump For EZGO Marathon 2-cycle Golf Carts 1982-1991 14151-G1 USD 18.33 Excellent Delivery
New List Item LABLT 1 Pair With Lock Heavy Duty Drawer Slides 38\" 500 Lbs Extension Rails Rail USD 55.60 LABLT SFU1605 Ballscrew Dual Sliding Linear Rail 100mm Effective Linear ± 0.03mm USD 54.75 LABLT 919Pcs Heavy Duty Metric Fastener Kit Grade 8.8 M4 M5 M6 M8 Hex Bolts Nuts USD 46.34 LABLT Carburetor Kit for John Deere L111 L118 L120 LA120 LA130 LA140 LA145 LA150 USD 35.06 LABLT 791230 Z425 Z235 Carburetor Carb For 445677 445877 445977 446677 446877 USD 33.66 LABLT Generator Control Module HGM1790N Gensets 24V 4 Stroke Engine For SmartGen
Description:
Type: Generator Control Module
Model: HGM1790N
Engine Type: 4 Stroke
Fuel Type: Diesel, Gasoline
Power Source: Fuel Powered
Recommended Uses For Product: Commercial, Residential
Voltage: 24 Volts
Special Feature: Remote Start
Color: Black
Engine Type: 4 Stroke
Ignition System Type: Electric start
Engine Displacement: 418 Cubic Centimeters
HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pumping unit). It can be started and stopped manually or via a remote start/stop signals. HGM1790N controller can supervise and protect genset operation by gathering and analyzing genset data like generate voltage, current, water temperature, oil pressure and so on, and graphical LCD monitor on the front panel displays fault conditions and provides effective alarm signals so as to do maintenance as soon as possible. Moreover, parameter threshold and delay value can be adjusted via front panel or USB port (communicated with PC software).
Pattern LCD display (with backlight), LED indicator, touch button operation;
The screen protection uses hard-screen acrylic materials;
Using silicone panels and buttons to adapt to high environmental and high temperature capabilities;
The power supply range is wide DC (8~35) V;
Collect and display single-phase voltage, current, frequency, power, and load percentage parameters: Power generation voltage V power generation frequency Hz; Power generation kW power generation current A; Load percentage %;
Various parameters of the precision acquisition engine: Oil pressure kPa temperature °C; Fuel level % cumulative running time H (up to 199999 hours); voltage V speed RPM; Cumulative boot times (up to 199999 times, displayed by the host computer);
Unit fault protection and display function;
The controller has 3 working modes: manual, automatic, and stop;
Multiple temperature, pressure and oil level sensors can be used directly and can customize parameters; temperature and pressure sensors can be separately and temperature, the pressure alarm is used in parallel to increase the primary protection while providing the analog quantity;
Multiple starting success conditions (speed, oil pressure, power generation frequency) can be selected;
1 programmable input port, which can be set as digital input or liquid level sensor;
2 relay fixed output ports (fuel output, start output);
3 programmable relay output ports, which can set public alarm output, preheat output or idle speed control output;
Parameter setting function: Allow users to change settings of their parameters, not lost when the system is powered off, most parameters of the controller can be adjusted from the front panel of the controller, and all parameters are adjusted by the PC through the USB interface (Type-B type);
All parameters are digitally adjusted to improve the reliability and stability of the whole machine;
Modular structure design, flame-retardant ABS shell, pluggable terminal block, embedded installation, compact structure and convenient installation.
Working Voltage: DC8. 0V to 35.0V. Continuous Power Supply
Power Consumption: <1.2W (Standby mode: s0.5W)
Alternator voltage Input: AC 15V -AC 30 V (ph-N)
Alternator Frequency: 5060Hz
Speed Sensor Voltage: 1.0V to 24V(RMS)
Speed Sensor Frequency: Max10KHz
Start Relay Output: 1Amp DC28V DC B+ power supply
Fuel Relay Output: 1Amp DC28V DC B+ power supply
Aux.Ouiput1: 1Amp DC28VDC B+ power supply
Aux.Output2: 1Amp DC28V DC B+ power supply
Aux.Ouitput3: 1Amp DC28V DC B+ power supply
Programmable input Digital: Active when connected to B-
Case Dimensions: 95mm × 86mm × 46.5mm
Panel Cutout: 78mm × 66mm
CT Secondary Current: Rated: 5A
Working conditions: Temperature: (-25-+70yC;Humidity:(20-93)%RH
Storage Condition: Temperature: (-25-+70yC
Protection Level: IP55: When waterproof rubber gasket installed between the controller and panel fascia.
insulation Intensity: Attach AC2.2kV voltage between AC high voltage terminal and low voltage terminal (leak current below 3mA in 1 minute).
Package Includes:
1 × HGM1790N Generator Control Module
About LABLT:
LABLT has rich experience in the production, sales and after-sales service of Industrial parts. For many years, we have been committed to providing professional and personalized services to enhance the shopping experience of buyers. If you need any parts, please come to LABLT to buy them. We look forward to cooperating with you!
PAYMENTSHIPPING & DELIVERYWARRANTY INFORMATIONRETURN POLICY
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders are posted by USPS or Fedex
The most Products has months warranty .
The warranty does NOT cover damage of faulty Goods caused by: an accident or crash, damage caused in transit, damage cause by unauthorised repairs, improper installation of the Goods.
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:
you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:
the Goods must be securely and appropriately packed so they are not damaged during transit;
the Goods must be returned in their original packaging;
the Goods must be like new and not show any signs of use or having been installed or fitted;
the claim for refund must be advised to us no later than 30 days after the date you bought the Good.
All rights reserved.
On Nov 6, 2026 at 17:13:04 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.