- Hose replacement designed for pull-down faucet parts .The one end of the kitchen replacement hose with the sprayer: G1/2 \" Female Thread (about 3/4\" ,19mm )Connects to Sprayer , fits most spray heads which have G1/2 straight male thread ( thread size about 2 cm or 0.8 inch). not NPT, not universal, not applicable Spray at 1/2 ". Not a universal shower head connector.
- The other end of the pull out hose: Link to the faucet, It does not come with quick link connectors. not suitable for quick-connect faucets. Below thread distance are both 14.75mm,but their thread distance are different. our replacement hose is male 15 with small gap thread which is 1mm (another male 15 with large gap thread which is 1.5mm,but not our hose dimension!!!) before buying, please check the size of the connector again! Not universal!!
- Warm reminder: the buyer commented that the replacement tube is suitable for some brands of faucets, but this does not mean that it is suitable for all models of the brand\'s faucets. Please check the size carefully according to the instructions, and replace the two ends of the tube with the same size to fit. If you need help, please contact our professional team, we will definitely give you a satisfactory answer
- The length depends on personal preference, there will be errors in different batches
- The material of the G1/2 is copper, the outside of the hose is stainless steel, and the inside is rubber
- Because the outer diameter of stainless steel is larger than nylon, and the pull-out hose needs to pass through the small hole in the faucet, if your original pipe is nylon, you cannot use this stainless steel.
Product description Usually used on this type of faucet SPECIFICATIONS -Material
SPECIFICATIONS -Material : Stainless Steel or nylon
Inner Tube Material : EPDM,
high pressure resistance -
Connnector Material : Brass -
Finish : Brushed
Length : 1.5-Meters or 2meters or 3meters
IMPORTANT:IMPORTANT: One Thread size is M15 x 1,
The other thread is G1/2 \" Female Thread (about 3/4\")Connects to Sprayer
Please check your connector size before purchase!
Usually used on this type of faucet Usually used on this type of faucet
Usually used on this type of faucet
How to separate specifications How to separate specifications
The main reason is that the small-head thread is not easy to judge. Our thread is m15*1mm thread distance.
How to separate specifications How to separate specifications
The main reason is that the small-head thread is not easy to judge. Our thread is m15*1mm thread distance.
Installation Instructions for Pulling Hoses
Place a rubber here,
tighten our hose
with your nozzle
Thread the hose from
above through below
Place a small rubber
on the head of hose
Tighten the upper threaded
part with a wrench or hand
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.