|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Keyence FD-G80 Clamp On Gas Flow Meter, New In Original Packaging
$2,200.00

The Keyence FD-G80 flow meter is a clamp-on gas flow meter used on stainless steel and iron pipes. Measures the flow of compressed air, nitrogen and other gases.Technical characteristics:Series: FD-G Supported pipe diameter: 2 1/ 2\" (65 A), ø72 - ø78 mm - 3\" (80 A), ø86 - ø92 mm Nominal flow: 3300 l/min, 120 cfm, 200 m³/h ( 65 A pipe) - 4600 l/min, 160 cfm, 280 m³/h (80 A pipe) Standard flow: At 60 psi pressure (0.41 MPa): 568.43 cfm (65 A pipe) - 757.91 cfm (80 A pipe) At 80 psi ( 0.55 MPa): 720.64 cfm (65 A pipe) - 960.85 cfm (80 A pipe) At 100 psi (0 .69 MPa): 872.84 cfm (65 A pipe) - 1163.79 cfm (80 A pipe) At 120 psi (0.69 MPa) 83 MPa): 1025.05 cfm (65 A pipe) - 1366.73 cfm (80 A pipe) Display: QVGA 2 .2-inch color LCD monitor Measurement accuracy: ± 1-2% of full scale I/O wiring port: 4-pin M12 male Control output (channel 1 / channel 2): NPN or PNP, open collector up to 30 V DC. current, up to 100 mA / channel, residual voltage up to 2.5 V Analog output (channel 2): from 4 to 20 mA / from 0 to 20 mA, load resistance up to 500 Ohm External input (channel 2): short circuit current up to 1.5 mA, input time from 20 ms Data transfer: USB, Modbus TCP, EtherNet/IP, IO-Link Supply voltage: 20 to 30 V DC. current Protection class: IP65 / IP67 Weight: 3.6 kg Type: flow sensors Measurement medium: gas Output signal: protocol

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|