KEYENCE LKG5001 Laser Displacement Sensor Controller, PNP Type for LK sensorsNo Box / No Papers
Specifications
Model
LK-G5001P
Type
Separate type Main controller
Sensor head compatibility
Compatible
No. of connectable sensor heads
2
Display
Minimum display unit
0.001 µm
Display range
±999.999 µm to ±9999.99 mm (7 settings selectable)
Display cycle
Approx 10 times/sec.
Display interface
Display port
Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
LED indicator
LASER ON
Terminal block
Analog output voltage
±10 V output, Output impedance: 100 Ω*1
Analog current output
4 to 20 mA, Maximum load resistance: 350 Ω*1
No. of analog outputs
2*1
TIMING 1 input
Voltage input*2
RESET 1 input
Auto-zero 1 input
Laser remote input
Non-voltage input*1
Alarm output
PNP open-collector output*1
General comparator output
Expansion connector
TIMING input
Voltage input*1
RESET input
Auto-zero input
Program switching input
Binary selection input
Alarm output
PNP open-collector output*1
Comparator output
Binary output
RS-232C interface
Baud rate: 9600 to 115200 bps
Data length: 8 bits Stop bit length: 1 bit Parity: None/even/odd
USB interface
USB 2.0 Hi-Speed compliant*3
Ethernet interface
Cyclic communication (implicit messaging)
Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14*5
PLC-Link
The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series
EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector
Up to 10 head expansion units can be connected to one main controller
Expansion unit connector
Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply
Power supply voltage
24 VDC ±10%
Maximum current consumption
0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance
Ambient temperature
When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F.
When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
Relative humidity
35 to 85 % RH (No condensation)
Weight
Approx. 600 g
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.