KEYENCE GC-S1R Safety Controller Expansion Unit Output Used Tested LOC S1

Condition: Used

Description:

KEYENCE GC-S1R Safety Controller Expansion Unit / Safety Relay Output Module.

Genuine KEYENCE industrial safety control equipment removed from an industrial environment. Units are in good physical condition with normal cosmetic signs of previous installation/use. Please review all photos carefully for condition.

Model: GC-S1R
Series: KEYENCE GC Safety Controller
Type: Safety Relay Output Expansion Unit
Safety Relay Output: 1 (3a)
Resistive Load Rating: 250 VAC 6 A / 30 VDC 6 A
Inductive Load Rating: 240 VAC 2 A / 24 VDC 1 A
Made in Japan

Listing is for ONE GC-S1R module unless otherwise stated. Multiple units are available. You will receive one unit in comparable condition to those pictured.

Model

GC-S1R

Input/output points

Safety inputs

-

Safety outputs

Safety relay output

1 (3a)

AUX outputs

-

Test outputs

Safety input specifications

Input device

Input type

ON level (voltage/current)

OFF level (voltage/current)

Short-circuit current

Protection circuit

Maximum cable length

Safety output specifications

Output type

Maximum load current

Residual voltage (during ON)

Leakage current (during OFF)

Maximum capacitive load

Load wiring resistance

Protection circuit

Maximum cable length

Safety relay output specifications

Output type

Relay (3a) (Externally-protected outputs)*1

Rated load (resistance load)

250 VAC 6A / 30 VDC 6A*2

Rated load (inductive load)

240 VAC 2A (AC-15) / 24 VDC 1A (DC-13)

Relay output mechanical life

Resistance load (250 VAC 6A/30 VDC 6A): Min. 100,000 times
Resistance load (250 VAC 1A/30 VDC 1 A): Min. 500,000 times
Inductive load (AC-15: 240 VAC 2 A): Min. 100,000 times (cosø = 0.3)
Inductive load (DC-13: 24 VDC 1 A): Min. 100,000 times (L/R = 48 ms)

Maximum cable length

Max. 100 m 328.1\'

B10d

With rated load: 400,000
With low load: 2,000,000

Test output specifications

Output type

-

Maximum load current

Protection circuit

Maximum cable length

AUX output specifications

Output type

Maximum load current

Residual voltage (during ON)

Leakage current (during OFF)

Protection circuit

Maximum cable length

Applicable standards

EMC

EMS: IEC 61131-2/-6, EN61131-2/-6,EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A

Safety

IEC 61508, EN 61508 SIL3, IEC62061 SIL CL3, ISO/EN 13849-1:2015 Cat. 4, PL e, UL1998

Dimensions

39.6×95×90 mm 1.56\"×3.74\"×3.54\" (W×D×H)

Power supply

Power voltage

-

Power consumption

Max. 80 mA

Environmental resistance

Ambient temperature

−10 to +55 °C 14 to 131 °F (No freezing)

Relative humidity

5 to 85% (No condensation)

Storage temperature

-25 to +70 °C -13 to 158 °F (No freezing)

Operating altitude

Max. 2000 m 6561.7\'

Overvoltage category

II (III for relay output part)

Pollution degree

2

Vibration resistance

Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14\"
Frequency: 9 to 150 Hz, Acceleration: 10 m/s2
10 times each in X, Y, Z directions

Shock resistance

Acceleration: 150 m/s2, Operating time: 11 ms, 3 times each in X, Y, Z directions

Material

Polycarbonate