KATOOL 3D Wheel Alignment Machine Wheel Aligner 3D Tire Wheel Aligning Machine

Matters needing attentionThe operator of the instrument must pass the training of the company, andcan operate after passing the training.The operator must have some basic knowledge of computer application.The operator must understand the basic knowledge of four-wheelpositioning.Check whether the power connection line contact is reliable, whether there isdamage.If the power supply voltage is unstable, please equip your own AC regulator.Check whether the car lift is firm and level regularly to ensure the correct testand the safety of personnel.Remove obstacles around the car lift so as not to affect the operation.Check all loose bolts and parts at the end of service and tighten them up forsafety.Four-wheel locator can not be placed on a vibrating object or tilted, shouldavoid direct sunlight or humidity.Four-wheel locator belongs to precision testing equipment, there aresensitive components, in the process of use should be taken gently, do notthrow random, otherwise light will lead to shell deformation, heavy will lead tointernal components failure, affect the normal use.Avoid splashing liquid on the surface of the four-wheel locator, lest liquidenter the system and cause permanent damage.After use, please cut off all power supplies.Four-wheel locator is tested through the method of image, do not let thestrong light to the sensor interference, and should avoid the object between thesensor blocking the light.Excerpt parameters:Measurement parameters, range and accuracy1 Total front beam AngleMeasuring range: ± 6 °.Accuracy: ± 4\' in ± 2 ° range, ± 10\' in other ranges.2. Front beam Angle of single wheelMeasuring range: ± 3 °.Accuracy: ± 2\' in ± 2 ° range, ± 5\' in other ranges.3. Wheel camberMeasuring range: ± 10 °.Accuracy: ± 2\' in ± 4 ° range, ± 10\' in other ranges.4 kingpin rear AngleMeasuring range: ± 15 °.Accuracy: ± 2\' in the range of ± 12 °, ± 10\' in other ranges.5 kingpin inclinerMeasuring range: ± 20 °.Accuracy: ± 6\' in range of 0 ° -- +18 °, ± 10\' in other ranges.126 thrust AngleMeasuring range: ± 6 °.Accuracy: ± 2\' in ± 2 ° range, ± 10\' in other ranges.7 axis AngleMeasuring range: ± 6 °.Accuracy: ± 2\' in ± 2 ° range, ± 10\' in other ranges.8 Indicates value requirements8.1 Display value resolutionThe angular resolution is 1\', where the forward beam value is 1\' in Angle or0.1mm in mm.8.2 Zero driftZero drift is not greater than 4\' within 30min.8.3 Indicating value errorThe value error is ± 4\'.8.4 Indicate value stabilityThe indicated stability is ± 2\' within 10s.Power SupplyWorking TemperatureMatters needing attentionThe operator of the instrument must pass the training of the company, andcan operate after passing the training.The operator must have some basic knowledge of computer application.The operator must understand the basic knowledge of four-wheelpositioning.Check whether the power connection line contact is reliable, whether there isdamage.If the power supply voltage is unstable, please equip your own AC regulator.Check whether the car lift is firm and level regularly to ensure the correct testand the safety of personnel.Remove obstacles around the car lift so as not to affect the operation.Check all loose bolts and parts at the end of service and tighten them up forsafety.Four-wheel locator can not be placed on a vibrating object or tilted, shouldavoid direct sunlight or humidity.Four-wheel locator belongs to precision testing equipment, there aresensitive components, in the process of use should be taken gently, do notthrow random, otherwise light will lead to shell deformation, heavy will lead tointernal components failure, affect the normal use.Avoid splashing liquid on the surface of the four-wheel locator, lest liquidenter the system and cause permanent damage.After use, please cut off all power supplies.Four-wheel locator is tested through the method of image, do not let thestrong light to the sensor interference, and should avoid the object between thesensor blocking the light.Excerpt parameters:Measurement parameters, range and accuracy1 Total front beam AngleMeasuring range: ± 6 °.Accuracy: ± 4\' in ± 2 ° range, ± 10\' in other ranges.2. Front beam Angle of single wheelMeasuring range: ± 3 °.Accuracy: ± 2\' in ± 2 ° range, ± 5\' in other ranges.3. Wheel camberMeasuring range: ± 10 °.Accuracy: ± 2\' in ± 4 ° range, ± 10\' in other ranges.4 kingpin rear AngleMeasuring range: ± 15 °.Accuracy: ± 2\' in the range of ± 12 °, ± 10\' in other ranges.5 kingpin inclinerMeasuring range: ± 20 °.Accuracy: ± 6\' in range of 0 ° -- +18 °, ± 10\' in other ranges.126 thrust AngleMeasuring range: ± 6 °.Accuracy: ± 2\' in ± 2 ° range, ± 10\' in other ranges.7 axis AngleMeasuring range: ± 6 °.Accuracy: ± 2\' in ± 2 ° range, ± 10\' in other ranges.8 Indicates value requirements8.1 Display value resolutionThe angular resolution is 1\', where the forward beam value is 1\' in Angle or0.1mm in mm.8.2 Zero driftZero drift is not greater than 4\' within 30min.8.3 Indicating value errorThe value error is ± 4\'.8.4 Indicate value stabilityThe indicated stability is ± 2\' within 10s.Power SupplyWorking Temperature

On May 16, 2024 at 00:31:21 PDT, seller added the following information: