|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
JTZXJJX R410A R22 AC Valve Core Remover Installer maintenance tools, Gold
$15.35

JTZXJJX R410A R22 AC Valve Core Remover Installer maintenance tools, Gold Product Details - Publisher: JTZXJJX
- Publication date: 0
- Valve core remover installer How to use:
- 1. Pull out the valve stem to the dead center, close the valve on the wrench, adjust the connector of the wrench to the air conditioner interface, and then tighten the air conditioner valve.
- 2. After the air conditioning valve is tightened, make sure the disassembled valve is open, push the valve stem into the air conditioning valve, rotate the knob at the end of the product to find the valve clamping angle, and then loosen the spool.
- 3. After the valve is removed, pull out the valve stem, close the valve on the product, loosen the disassembly knob, take out the valve spool and remove it.
- 4. Note: Before removing the spool, close the spool wrench valve and disconnect the internal connection of the air conditioner.
Item Name: Valve Core Remover InstallerColor: yellowMaterial: BrassSize: 11.7x1.6 cm/4.61x0.63 in.Service ports: 1/4 in. and 5/16 in. SAE female threadsBypass port: 1/4 in. male SAE threadsApplicable: R22/R134/R410/R32 air conditioning refrigerant

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|