JTAGulator is a hardware security tool designed to assist in identifying and interfacing with on-board debug interfaces such as JTAG (Joint Test Action Group) and UART (Universal Asynchronous Receiver-Transmitter). Developed by Joe Grand of Grand Idea Studio, JTAGulator is primarily used by security researchers, and engineers to simplify the process of reverse engineering and debugging embedded systems.
The device automates the discovery of debug interfaces by probing multiple test points or pins on a target system, helping users determine which pins correspond to JTAG or UART functions. This capability is valuable for analyzing and modifying firmware, bypassing security mechanisms, or recovering bricked devices.
JTAGulator features a user-friendly serial interface and supports various voltage levels, making it adaptable to different hardware environments. By streamlining the process of identifying debug interfaces, JTAGulator enables security professionals to conduct hardware assessments more efficiently.
- Detects JTAG/IEEE 1149.1, ARM SWD, and UART/asynchronous serial
- Direct connection to sigrok and OpenOCD
- 24 channels with input protection circuitry
- Adjustable target I/O voltage for level translation: 1.4V to 3.3V
- USB interface for menu-based control from host computer
- Units have been flashed with the latest available firmware and fully tested with the procedure described on grandideastudio\'s website.
Resistor arrays R11, R12, and R13 are 10 Ω SOMC160310R0GEA (Resistor Networks & Arrays 16pin 10Ω 2% Isolated) per developer recommendation: \"For improved JTAGulator target compatibility and detection results at the expense of having reduced over-voltage protection\"
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.