- Works with Sony camera/ camcorder with a multi/ LANC terminal and Canon camcorder with a LANC terminal.
- Fits most tripods with handle diameter within 0.4\"-1.4\".
- Adds a pan-handle based camera control to your setup, enables you to control your camera by using a cable connected to the multi/ LANC port rather than using buttons on the camera and makes operation more convenient and flexible.
- Detachable multi-function controller for detaching from the tripod to prevent camera shaking when shooting still images.
- Constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use.
- Rotates and positions at any 10-degree interval while avoiding slippage or accidental loosening.
- Additional features include power on/ off, video/ still image recording, zooming, slow zooming, locking functionand displaying grid line.
- Comes with one connecting Cable for Multi Terminal,one connecting Cable for LANC Terminal, a storage pouch and a lanyard.
JJC TPR-U1 Pan Bar Controller is especiallydesigned to work with Sony camera / camcorder with a Multi/LANCterminalandCanon camcorder with a LANC terminal, adding a pan-handle based camera control to your setup. It fits most tripods with handle diameter within 0.4\"-1.4\".
It enables you to control your camera/ camcorder by using a cable connected to the multi / LANC port rather than using buttons on the camera/ camcorder. This can make operation much more convenient and flexible for you, enables you to focus on the shot you are trying to capture rather than the mechanics of the equipment. Designed with a detachable multi-function controller, you can detach the controller from the tripod to prevent camera shaking when shooting still images.Hold the tripod and press the PUSH RELEASE button to pull the controller out. Slowly slide the controller onto the pan bar for easy attaching. And the controller functions with power on/ off, video/ still image recording, zooming, slow zooming, locking functionand displaying grid line*.
Silicone pads designed inside the handle clip are for closer clamping and protect tripod handle from scratching. Constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use. Rotate direction controland lock knob to position the pan bar at any 10-degree interval while avoiding slippage or accidental loosening.
Package contains onecable for Sony camera/ camcorder with Multiterminal, one cable for Sonycamera / camcorder and Canon camcorder with LANC terminal,a storage pouch for easy storage and a lanyard for preventing loss when using the detachable controller alone. Not all cameras/ camcorder supports shooting, bulb shooting, continuous shooting or grid line. Refer to the operating instructions of your camera/ camcorder for details.
CompatibilityFits Sony camera / camcorder with a Multiterminal, below are some of the modelsfor reference:
Sony Cameras:FX30/FX3/ A6600/A6500/A6400/A6300/A6100/A6000/ RX100 Mark VII/ VI/VA/IV/III/II / RX10 IV/IIISony Camcorders:PXW-X70/PXW-Z90V/HXR-NX80 FDR Series: HDR Series: CX240/CX405/CX440/CX455/CX675/CX900
Note: When being used with the above Mirrorless cameras, the Zooming function of the remote commander can only work with power zoom lens such like the Sony E PZ 16-50mm f/3.5-5.6 OSS Lens.
Fits most Sonycamcorders and cinema cameras that have a LANC terminal or 2.5mm Remote Terminal, below are some of themodels for reference:
SonyCamcorders:
PXW-FS5/PXW-FS7/ PXW-X160/PXW-X180/ PXW-Z100/PXW-Z150/PXW-Z190/PXW-Z280/ FDR-AX700
Package Includes
Pan Bar Controller x1
Connecting Cable for Multi Terminal x1
Connecting Cable for LANC Terminal x1
Storage Pouch x1
Lanyard x1
Instruction Manual x1