|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
JJC 35mm Slide and Film Digitizing LED Backlight with 10-Level Brightness
$37.11

The JJC FDA-LED1 LED Light Set includes an LED light, a slide mount holder and a strip film holder, which is specially designed for negative copying and converts film to digital files. The set is compatible with micro lenses and can be used to photograph 35mm film. The supplied LED light features 42 built-in ultra-bright LEDs and those LEDs are covered with a screen to produce a soft and even light. The color difference can be effectively reduced for the LED\'s 95+ color rendering index and 6500K color temperature. Besides that, the connection cable of the LED is about 1.5m / 4.9\' and it requires a 5V-2A USB power adapter (not included) for power supply. The controller on the cable allows you to turn on or turn off the LED and enables you to adjust the brightness of this light (the brightness has 10 levels available). You can insert the slide mount holder or strip film holder into the holder insertion slot on the LED to provide high quality light source when carrying on a negative copying. Additionally, the support on its back is designed for using on a flat surface; the 1/4\"-20 female thread on the bottom is designed for mounting on a tripod or stand.Specifications: For LED Light Net Weight: approx. 73g Dimension: 71 x 91.2 x 52.8mm / 2.8 x 3.6 x 2.1\" Material: ABS LED Quantity: 42 Color Rendering Index(CRI): 95+ Color Temperature: 6500K Illuminance: 10cm / 3.9\" , 6392lux; 20cm / 7.9\", 1473lux; 30cm / 11.8\", 988lux Brightness: 10 levels Power Draw: 7.5W Interface: Micro USB Cable Length: approx. 1.5m / 4.9\'The Negative Converter Light set is unique design for re-photographing 35mm negatives and slides with macro lenses. It creates good light source condition when digitizing film. It utilizes 42 LEDs with a CRI of 95+ to deliver daylight illumination with high color accuracy and features a color temperature 6500K. Two dimming buttons (\"+\", \"-\") is provided on the controller for adjusting light output from level 1 to 10. (Note* Please do not place the film in front of the LED light for a long time when is on.) The slide negative light has a kickstand on its back which allows to place on a flat surface. It also comes with one shoe mount adapter with 1/4” screw which allows you to mount on a tripod. Insert the slide mount holder or strip film holder into the LED insertion slot to provide high quality light source when digitizing film. What you get: LED Light x1, Slide Mount Holder x1, Strip Film Holder x1, USB Cable x1.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|