1. Vertical resolution of waveform is optimized to 14bit, 266MSa/s sampling rate, more exquisite waveform.
2. 2.4-inch high-definition color LCD screen ensures good operation fluency, lots of shortcuts greatly simplifies the operation steps.
3. It can use standard PC software to control all machine functions and draw arbitrary waveform, communication protocol publicity makes secondary development very simple.
4. Large scale integrated circuit and SMT technology, high reliability, long service life.
5. It has output short circuit , all signal output end can work for 60s under the condition of load short circuit.
Specification:
Description:
JDS2900 series small portable dual-channel DDS function/arbitrary waveform generators adopt the DDS direct digital synthesis technology, producing precise, stable, low distortion output signal. It is a function signal generator, as well as a arbitrary waveform generator, a pulse signal generator, a noise generator, a counter, which can also measure signal and sweep frequency, especially suitable for electronic enthusiasts, scientific research institutions and high-tech enterprises.
Features:
- Vertical resolution of waveform is optimized to 14bit, 266MSa/s sampling rate, more exquisite waveform.
- Sine wave frequency is optimized to 0.01uHz-60MHZ, square wave is 0.01uHz-15MHz.
- Each function has independent operating interface, smooth switch without pause.
- Bias adjustment is optimized to -9.99V to +9.99V, more precise.
- Two channel phase difference adjustment is optimized to 0.1 degrees; the time delay is more accurate.
- 2.4-inch high-definition color LCD screen ensures good operation fluency, lots of shortcuts greatly simplifies the operation steps.
- It can use standard PC software to control all machine functions and draw arbitrary waveform, communication protocol publicity makes secondary development very simple.
- Large scale integrated circuit and SMT technology, high reliability, long service life.
- It has output short circuit , all signal output end can work for 60s under the condition of load short circuit.
Specifications:
Model(Optional) JDS2900-15MHz JDS2900-30MHz JDS2900-40MHz JDS2900-50MHz JDS2900-60MHz Sine Wave Frequency Range 0~15MHz 0~30MHz 0~40MHz 0~50MHz 0~60MHz Square Wave Frequency Range 0~15MHz 0~25MHz 0~25MHz 0~25MHz 0~25MHz Triangular Wave Frequency Range Pulse Wave Frequency Range 0~6MHz 0~6MHz 0~6MHz 0~6MHz 0~6MHz TTL Digital Wave Frequency Range Arbitrary Wave Frequency Range Pulse Width Adjusting Range 100nS~4000S 50nS~4000S 40nS~4000S 30nS~4000S 25nS~4000S Square Wave Rise Time ≤25ns ≤15ns ≤10ns ≤10ns ≤10ns Frequency Minimum Resolution 0.01μHz(0.00000001Hz) Accuracy of Frequency ±20ppm Frequency Stability ±1ppm/3hours Waveform Waveform Types Sine wave, square wave, pulse wave (adjustable duty cycle, pulse width and cycle time), wave, partial sine wave, CMOS wave, DC level (adjust bias to set DC magnitude), half wave, full wave, positive step wave, negative step wave, noise wave, index up, index down, sonic wave, sinc pulse, Lorentz pulse, and 60 kinds of user-defined waveforms. Wave Length: 2048 points Waveform Sampling Rate 266MSa/s Waveform Vertical Resolution 14 Sine Wave Harmonic Suppression ≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz) Total Harmonic Distortion <0.8%(20Hz~20kHz,0dBm) Square Wave/Pulse Wave Overshoot ≤5% Pulse Wave Duty Ratio Adjustment Range 0.1%~99.9% Partial Sine Wave Duty Ratio Adjustment Range 0.1%~99.9% Sawtooth Wave Linearity ≥98%(0.01Hz~10kHz) Output Sine Wave Amplitude Range Frequency ≤10MHz 10MHz≤Frequency≤30MHz 30MHz≤Frequency 2mVpp~20Vpp 2mVpp~10Vpp 2mVpp~5Vpp Square/ Wave Amplitude Range Frequency ≤10MHz 10MHz≤Frequency≤25MHz 2mVpp~20Vpp 2mVpp~5Vpp Amplitude Resolution 1mV Amplitude Stability ±0.5%/5hours Amplitude Flatness ±5%(<10MHz); ±10%(>10MHz) Waveform Output Output Impedance 50Ω±10% (typical) Protecting All signal output can be work under load short circuit conditions within 60 DC Bias Bias Adjusting Range Output Amplitude > 2V 0.2V<output amplitude≤2V 0<output amplitude≤0.2V -9.99V~9.99V -2.5V~2.5V -0.25V~0.25V Bias Resolution 0.01V Phase Phase Adjusting Range 0~359.9o Phase Resolution 0.1o TTL/CMOS Output Low Level <0.3V High Level 1V~10V Level Up/Down Time ≤20ns External Measurement Function Frequency Meter Function Frequency Measurement Range 1Hz~100MHz Measurement Accuracy Gate time 0.01S~10S continuous adjustment Counter Function Count Range 0-4294967295 Coupling Mode DC and AC coupling modes Counting Mode Manual Input Signal Voltage Range 2Vpp~20Vpp Pulse Width Measurement 0.01us resolution, maximum measure 20s Cycle Measurement 0.01us resolution, maximum measure 20s Frequency Sweep Function Sweep Frequency Channel CH1 or CH2 Frequency Sweep Type Linear sweep, logarithm sweep Frequency Sweep Time 0.1s~999.9s Set Range Starting point (0.01 Hz) and end point are set arbitrary between maximum output frequency of corresponding . Frequency Sweep Direction Forward, Reverse, Back and Forth Burst Function Pulse Number 1-1048575 Burst Mode Manual burst, CH2 burst, external burst (AC), external burst (DC) General Technical Specifications Display Display Type 2.4 inch TFT color LCD display Storage and Loading Quantity 100 groups Location 00 to 99 (power on default 00 storage location parameters) Arbitrary Wave Quantity 1 to 60, a total of 60 groups (power on default 15 groups) Interface Interface Mode USB to serial interface
Weight: 933g(approx.)
Voltage: AC100-240V
Package Includes:
1 x JDS2900 Dual-channel Signal Generator
1 x Power Adapter
1 x USB Cable
2 x Signal Connecting Cable
1 x English User Manual
1 x CD
1 x BNC Cable
Note:
Please kindly make a note if you need any plug adapter.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
1. Our listing price includes the value of goods,packaging cost,and exporttaxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3.The duties are buyers\' responsibility.Please check with your country\'scustoms office determine what these additional costs will be prior to yourpurchase.
4. All disputes arising from the duties will be submitted to for solution.
1. Any questions,pls. contact us via message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive response and give us the Detailed Seller Rating with all \"5\" in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.