Bi-Directional 4-Channel Logic Level Converter -- safely shifts 5V↔3.3V signals in both directions simultaneously. Ideal for connecting 3.3V I2C sensors to 5V Arduino. 4 independent channels, automatic direction detection.
SPECS: Channels: 4 | HV max: 6V | LV min: 1.8V | Compatible: 1.8V, 2.8V, 3.3V, 5V | I2C ready | Digital signals only | Size: Approx. 15 x 13 mm (0.6 x 0.5 in)
IMPORTANT: For digital signals ONLY -- not for analog voltages. Common ground is required between 5V and 3.3V systems. Do not exceed 6V on the HV pin. LV pin requires at least 1.8V.
I2C WIRING: HV→5V, LV→3.3V, both GNDs to common ground. Arduino SDA (A4)→HV1, Sensor SDA→LV1. Arduino SCL (A5)→HV2, Sensor SCL→LV2.
PACKAGE: 1x module + 2x pin headers. Ships from Fort Collins, CO, USA. Fast handling. Questions? Message us!
Electronics for IoT, Prototyping & DIY
Bi-Directional 4-Channel Logic Level Converter -- safely shifts 5V↔3.3V signals in both directions simultaneously. Ideal for connecting 3.3V I2C sensors to 5V Arduino. 4 independent channels, automatic direction detection.
SPECS: Channels: 4 | HV max: 6V | LV min: 1.8V | Compatible: 1.8V, 2.8V, 3.3V, 5V | I2C ready | Digital signals only | Size: Approx. 15 x 13 mm (0.6 x 0.5 in)
IMPORTANT: For digital signals ONLY -- not for analog voltages. Common ground is required between 5V and 3.3V systems. Do not exceed 6V on the HV pin. LV pin requires at least 1.8V.
I2C WIRING: HV→5V, LV→3.3V, both GNDs to common ground. Arduino SDA (A4)→HV1, Sensor SDA→LV1. Arduino SCL (A5)→HV2, Sensor SCL→LV2.
PACKAGE: 1x module + 2x pin headers. Ships from Fort Collins, CO, USA. Fast handling. Questions? Message us!
Bi-Directional 5V to 3.3V 4-Channel Logic Level Converter Module -- I2C & Arduino Ready
Trying to connect a 3.3V sensor or I2C module to a 5V Arduino? This compact bi-directional logic level converter safely translates digital signals between 5V and 3.3V -- in both directions, simultaneously, on the same channel. With four independent channels and automatic direction detection, it\'s the easiest way to bridge the voltage gap in any mixed-logic project.
⭐ Key Features
- Bi-Directional Conversion -- Shifts signals from 5V down to 3.3V AND from 3.3V up to 5V on the same channel, at the same time.
- 4 Independent Channels -- Convert up to four signal lines simultaneously (HV1–HV4 paired with LV1–LV4).
- Wide Voltage Compatibility -- Works with 1.8V, 2.8V, 3.3V, and 5V logic devices -- not just 5V-to-3.3V.
- I2C & Arduino Ready -- Purpose-built for I2C bus signals (SDA and SCL) but works with any digital signal line.
- Automatic Direction Detection -- MOSFET-based design detects and handles signal direction with no direction-control pin needed.
- Component Protection -- Prevents 5V signals from reaching 3.3V devices, protecting your sensors and modules from damage.
- Compact & Breadboard Friendly -- Small board with included pin headers for fast prototyping.
📊 SpecificationsNumber of Channels4 (independent)Maximum High Voltage (HV)6VMinimum Low Voltage (LV)1.8VSupported Logic Levels1.8V, 2.8V, 3.3V, 5VSignal TypeDigital only (not suitable for analog signals)Direction ControlAutomatic -- no manual direction pin requiredI2C CompatibleYes (Standard Mode 100 kHz, Fast Mode 400 kHz)DimensionsApprox. 15 × 13 mm (0.6 × 0.5 inches) L × W 📌 PinoutPin LabelSideDescriptionHVHigh VoltagePower input -- connect to 5V supplyLVLow VoltagePower input -- connect to 3.3V supplyGNDBoth sidesCommon ground -- must be shared between 5V and 3.3V systemsHV1 – HV4High VoltageChannel 1–4 signal pins for the 5V logic sideLV1 – LV4Low VoltageChannel 1–4 signal pins for the 3.3V logic side 🔌 Wiring Instructions
Step 1 -- Connect Power:
- Connect HV to your 5V supply (e.g., Arduino 5V pin).
- Connect LV to your 3.3V supply (e.g., Arduino 3.3V pin).
- Connect both GND pins to the common ground of your circuit.
Step 2 -- Connect Signal Lines:
- Connect the 5V device\'s signal to the HVx pin of your chosen channel.
- Connect the 3.3V device\'s signal to the corresponding LVx pin.
- Unused channels can be left unconnected.
I2C Example -- Arduino Uno to 3.3V Sensor:
Arduino (5V)HV SideLV Side3.3V Sensor5VHVLV3.3VGNDGNDGNDGNDSDA (A4)HV1LV1SDASCL (A5)HV2LV2SCL ⚠️ Important Notes⚠️ Digital Signals Only -- This module is designed for digital (HIGH/LOW) signals only. It cannot proportionally convert an analog voltage. For analog signals, use a resistor voltage divider instead.⚠️ Common Ground Required -- The 5V and 3.3V systems must share a common ground. Without it, the module will not function correctly. Connect both GND pins to the same ground rail.💡 Voltage Limits -- Do not apply more than 6V to the HV pin. The LV pin requires a minimum of 1.8V to operate correctly. 📦 What\'s in the Box
- 1x Bi-Directional 5V to 3.3V 4-Channel Logic Level Converter Module
- 2x Pin headers (for soldering to the board)
Breadboard, jumper wires, Arduino, and sensor are not included.
🔌 Compatible With
- Arduino Uno, Nano, Mega, Leonardo, and other 5V Arduino boards
- 3.3V I2C sensors and modules (BME280, MPU-6050, OLED displays, and more)
- Raspberry Pi, ESP8266, ESP32, and other 3.3V single-board computers or microcontrollers
- Any system requiring digital signal translation between 1.8V, 2.8V, 3.3V, or 5V logic
🏪 About Envistia Mall
Envistia Mall is a US-based electronics retailer specializing in development boards, sensors, modules, and components for makers, engineers, and educators. We ship from the United States with fast handling times. Product documentation and technical support are available at our dedicated support site.
📦 Fast Free US Shipping | 🔄 Hassle-Free Returns | 📧 Responsive Customer Support
Visit our store for jumper wires, breadboards, Arduino-compatible boards, sensors, I2C modules, and more electronics components for your next project.
Featured Products
3 x 40Pin 20cm DuPont 1P-1P Wire Jumper Cables Pin-Pin Pin-Socket Socket-Socket
$8.29
NE555P NE555 DIP-8 High Precision Oscillator Timer IC TI 555 10/20/50/100 Pcs US
$8.49
65Pcs Solderless Breadboard Male-Male Jumper Cables Wires Various Lengths US Stk
$7.29
HC-05 Bluetooth RS-232 Master/Slave Transceiver Module – Wireless UART – 6-Pin
$12.39
5Pcs IIC I2C 4-Channel Bi-Directional 5V to 3.3V Logic Level Converter Module US
$9.49
2Pcs HC-05 Wireless Bluetooth RF Serial Transceiver Module 6Pin RS232 TTL US
$17.89
SD Card Reader Writer SPI Module for Arduino - Dual 3.3V 5V Level Shifting US
$6.29
2pcs Micro SD TF Memory Card Reader Writer Module with SPI interface For Arduino
$7.89 Add suggested items to your listings - Check it out on 3Dsellers.com
· All Rights Reserved to My Store ·
listing template by 3Dsellers.com - Try for Free!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.