IFM PN7003 Pressure Sensor With Digital Display

IFM PN7003 Pressure Sensor With Digital Display

• Two programmable switching outputs
• With long-term stability thanks to high overload protection
• Lifespan of more than 100 million pressure cycles
• Clearly visible numerical display
• Country-specific pressure units selectable

Output signal switching signal; IO-Link; (configurable) Measuring range 0...25 bar 0...363 psi 0...2.5 MPa Process connection threaded connection G 1/4 Internal thread Application System gold-plated contacts Application for industrial applications Media liquids and gases Medium temperature [°C] -25...80 Min. bursting pressure 350 bar 5075 psi 35 MPa Pressure rating 150 bar 2175 psi 15 Mpa Type of pressure relative pressure Electrical data Operating voltage [V] 18...36 DC; (according to EN 50178 SELV/PELV) Current consumption [mA] < 35 Min. insulation resistance [MΩ] 100; (500 V DC) Protection class III Reverse polarity protection yes Overvoltage protection yes; (< 40 V) Power-on delay time [s] 0.3 Integrated watchdog yes Inputs / outputs Number of inputs and outputs Number of digital outputs: 2 Outputs Total number of outputs 2 Output signal switching signal; IO-Link; (configurable) Electrical design PNP/NPN Number of digital outputs 2 Output function normally open / closed; (configurable) Max. voltage drop switching output DC [V] 2 Permanent current rating of switching output DC [mA] 250 Switching frequency DC [Hz] < 170 Short-circuit protection yes Type of short-circuit protection yes (non-latching) Measuring/setting range Measuring range 0...25 bar 0...363 psi 0...2.5 MPa Set point SP 0.2...25 bar 4...362 psi 0.02...2.5 MPa Reset point rP 0.1...24.9 bar 2...360 psi 0.01...2.49 MPa In steps of 0.1 bar 2 psi 0.01 MPa Factory setting SP1 = 6.3 bar rP1 = 5.8 bar SP2 = 18.8 bar rP2 = 18.3 bar Accuracy / deviations Switch point accuracy [% of the span] < ± 0,5 Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K) Characteristics deviation [% of the span] < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) Hysteresis deviation [% of the span] < ± 0,25 Long-term stability [% of the span] < ± 0,05; (per 6 months) Temperature coefficient zero point [% of the span / 10 K] 0,2; (-20...80 °C) Temperature coefficient span [% of the span / 10 K] 0,2; (-20...80 °C) Reaction times Delay time programmable dS, dr [s] 0; 0,2...50 Software / programming Parameter setting options hysteresis / window; normally open / closed; Diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit Interfaces Communication interface IO-Link Transmission type COM2 (38,4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 CDV Profiles no profile SIO mode yes Required master port class A Process data analog 1 Process data binary 2 Min. process cycle time [ms] 2.3 Supported DeviceIDs Type of operation DeviceID default 310 Operating conditions Ambient temperature [°C] -20...80 Storage temperature [°C] -40...100 Protection IP 65 Display Display unit 3 x LED, green Switching status 2 x LED, yellow Function display alphanumeric display, 4-digit Measured values alphanumeric display, 4-digit