|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
I.D. Systems 900-00000096 Rev E Automatic Range Selecting Relay 15A 12V Module
$14.99

I.D. Systems Automatic Range Selecting Relay, part number 900-00000096, Rev. E. Serial 19-DR311238-WIN. Used unit pulled from service.Ratings printed on the nameplate: contact rating CCA and CCB, minimum 5uA, maximum 15A at 12V (25C) and 3.9A at 80V (25C). cULus Classified, file AU5148. Made in Dongguan, China.The molded black potted housing has wire function markings on the ends (GRN-LO, ORG-HI, OFF-NP) and comes with the factory pigtail leads: two orange, one yellow, one green 18 AWG 600V leads on one end and two gray leads with insulated quick-disconnect terminals on the other.Condition: used. Housing shows light scuffing, the 3M VHB adhesive pads are still attached to the back, several lead terminations are wrapped in black electrical tape over Permaseal heat-shrink connectors, and one green lead is cut and unterminated. Not tested - sold as-is, as pictured.What you get: exactly the module and attached leads shown in the photos. No additional hardware, brackets or documentation included. Condition Used pull with factory wire leads intact; several terminated leads are wrapped in black electrical tape and use Permaseal heat-shrink connectors. Housing shows light scuffing, 3M VHB tape pads remain on the back, and one green lead end is cut/unterminated. Please note - Black tape wrapped over spliced lead terminations
- One green lead cut and unterminated
- Light surface scuffs on housing
What\'s included - Pre-wired pigtail leads with insulated female quick-disconnect terminals
- 3M VHB adhesive mounting pads
Details - Automatic Range Selecting Relay for battery charger interface
- Contact rating CCA and CCB
- Max 15A @ 12V, 25°C
- Max 3.9A @ 80V, 25°C
- Min switching 5uA
- cULus Classified, file AU5148
- Color-coded leads: GRN-LO, ORG-HI, OFF-NP markings molded on housing
- 18 AWG 600V UL1015 lead wire
- 3M VHB adhesive mounting pads
You are buying exactly what is shown in the photos.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|