Genuine Original Hunter Replacement Wireless Remote Receiver for Ceiling Fans.
(These are found in \"new platform\" fans sold from 2013 on)
The Green version of this receiver is a newer version of the Blue version
Operates fan speeds,instant fan \"Off,\" and fullydimmable light operation. Rated for fans at 1.0 amps and fan lightingat 60 watts. Receiver fits in fan canopy. Replacement for damaged or defective wireless receiver
Receiver only (wireless remote/transmitter not included)Part # K803203000 must match part # of your current receiver (found on sticker as the back as shown in photo)FREQ: 434MHz
G: 1.9Pairing Instructions:Note: The remote must be paired to this new receiver before the fan will operate.
Turn off the breaker that powers the fan. Leave power off for 1 minute and then turn back on.
Within 3 minutes, press the pairbutton on the remote (inside the battery compartment). If pairing wassuccessful, a single beep will sound.Replace the battery door.If it doesnot beep, turn off power to your fan, wait1 minute then try again. If using thetransmitter with multiple fans, repeatthis process for each fan.
If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.