|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
High Quality Incremental Encoder 00-01024-HFS0-5RW
$447.19

Interface Interface Programmable Incremental Programming Functions (1-16384), Output, Counting Direction Configuration Tool Configuration Tool (Version ≥ 1.6.10) Outputs Output Driver Push-Pull (HTL) Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage Output Voltage Low Level Push-Pull (HTL) < 0.5 V Output Voltage High Level RS422 (TTL) > 4 V Output Voltage Low Level RS422 (TTL) < 0.5 V Maximum Frequency Response 1 MHz Maximum Switching Current 50 mA per Channel Electrical Data Supply Voltage 4.75 – 30 VDC Current Consumption ≤60 mA @ 5V DC, ≤30 mA @ 10V DC, ≤25 mA @ 24V DC Power Consumption ≤ 1.0 W Start-Up Time < 1 s Min. Load Resistance 120 Ω Reverse Polarity Protection Yes Short Circuit Protection Yes EMC: Emitted Interference 61000-6-4 EMC: Noise Immunity 61000-6-2 MTTF 280 years @ 40 °C Sensor Technology Magnetic Accuracy (INL) ±0.0878° (≤ 12 bit) Duty Cycle 180° ± 12° (Speed > 100RPM) Phase Angle 90° ± 6° (Speed > 100RPM) Environmental Specifications Protection Class (Shaft) IP65 Protection Class (Housing) IP66/IP67 Operating Temperature -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F) Humidity 98% RH, no condensation Mechanical Data Mechanical Data Housing Material Steel Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance) Flange Type Blind Hollow, ø 58 mm (H) Flange Material Aluminum Shaft Type Blind Hollow, Depth = 28 mm Shaft Diameter ø 15 mm (0.59\") Shaft Material Stainless Steel V2A (1.4305, 303) Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²] Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) Max. Permissible Mechanical Speed ≤ 12000 1/min Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27) Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29) Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) Length 71,2 mm (2.80\") Weight 920 g (2.03 lb) Maximum Axial / Radial Misalignment Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm Electrical Connection Connection Orientation Radial Cable Length 5 m [197\"] Wire Cross Section 0.14 mm² / AWG 26 Material / Type PVC Cable Diameter 6 mm (0.24 in) Minimum Bend Radius 46 mm (1.81\") fixed, 61 mm (2.4\") flexing Certification Approval CE Product Life Cycle Product Life Cycle New Connection Plan SIGNAL CABLECOLOR A Green /A Yellow B Grey /B Pink Z Blue /Z Red Power Supply Brown GND White Shielding Shield Connector-View on Encoder

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|