EFFLUVIALTECH® - 110V Automatic Melt Index Instrument EFFLUVIALTECH® 110V Automatic Melt Index Instrument Product Overview
The automatic melt index instrument measures melt flow rates of various polymeric materials in viscous flow states. This system accommodates high-temperature melting materials including polycarbonate, aromatic polymers, fluoroplastics, and similar compounds, while also supporting lower-temperature materials such as polyethylene, polystyrene, and related resins.
Compliant with international standards including GB/3682-2000, ASTM-D1238D3364, JIS-K7210, and ISO-1133, this instrument serves diverse applications across polymer raw material analysis, petrochemical industry applications, academic research institutions, and quality inspection departments for precise melt-mass flow rate (MFR) determinations.
✓ GB/3682-2000 ✓ ASTM-D1238D3364 ✓ JIS-K7210 ✓ ISO-1133 Product Parameters Temperature Range Room Temperature~400°C Temperature display error ±0.1°C Temperature fluctuation ±0.1°C Recovery time ≤1min, quick restoration after filling Temperature Control Resolution 0.1°C Timing Resolution 0.01S Loading 10KG (0.325kg, 0.875kg, 0.96kg, 1.2kg, 1.64kg, 5kg) Testing methods Mass method and Volume method Scraping mode Manual and Automatic Power 450W Voltage 110V/60HZ Testing range 0.1-200g/10min Temperature Recovery Less than 3 minutes Working Environment Requirements Ambient Conditions
Temperature: 10℃-40℃
Relative humidity: 30%-80%
Installation Specifications
Vibration-free location without corrosive media
Secure installation on stable foundation
Operational Safety Guidelines
- High-temperature components require protective equipment: heat-resistant gloves, safety goggles, and appropriate lab attire
- Avoid direct contact with heated components; utilize specialized tools (die clips, pressing rod, cleaning rod)
- Exercise caution with sharp blades during cleaning, maintenance, and adjustment procedures
- Handle test weights carefully to prevent injury or equipment damage
- Ensure proper equipment grounding before operation
- Avoid internal maintenance during device operation
- Prevent water or solvent contact with electrical components during cleaning
Product Features ⚡ Rapid Temperature Response
Quick and accurate temperature rise with high precision constant temperature maintenance and rapid recovery after material introduction.
🎛️ Flexible Testing Modes
Manual and automatic cutting test methods with convenient calibration and adjustment of experimental parameters.
📊 Advanced Control Interface
LCD display operation controller with integrated printer for automatic test result documentation and data recording.
Operation Controller
LCD display screen with control buttons for clear parameter visualization and simplified testing procedures.
Volumetric Testing Device
Integrated Data Printer
Compact printer design for automatic data documentation with space-efficient hidden configuration.
Organized Tool Storage
🎯 Precision Measurement
High accuracy temperature control (±0.1°C) and timing resolution (0.01S) for reliable test results.
🔄 Rapid Recovery
Quick temperature restoration (<1min) after material filling ensures efficient testing workflow.
Operation Method Test Method A: MFR (Mass Flow Rate)
Note: MVR functionality can be enabled/disabled via parameter setting (\"0\"=off, \"1\"=on)
- Activate power switch and heating system (TEMP-ON/OFF)
- Input material testing temperature, cutting count, interval time, and select testing weight
- Position opening die baffle and insert opening die component
- Wait for temperature stabilization at set point (15-minute stabilization period)
- Add approximately 6g test material through funnel with incremental compaction using pressing rod
- Position testing rod and initiate material preheating countdown
- Add test weights after countdown completion
- Initiate sampling when first testing rod marking reaches material barrel opening
- Terminate sampling when second marking reaches opening
- Weigh valid sample strips, calculate average, and input into system
- Print results using integrated printer if required
- Clean opening die using specialized cleaning tools
- Clean material barrel interior using gauze-wrapped cleaning rod
Test Method B: MVR (Volume Flow Rate)
Note: MVR functionality must be enabled in system parameters
- Activate power and heating systems as described in Method A
- Input all testing parameters including temperature, cutting count, interval time, and weight selection
- Install opening die assembly
- Await temperature stabilization (15-minute period)
- Add and compact test material as previously described
- Position testing rod and initiate preheating sequence
- Automatic MVR timing initiates when first marking reaches barrel opening
- Automatic timing terminates when second marking reaches opening
- System automatically displays MVR results
- Print results if documentation required
- Perform complete cleaning procedure as previously described
Product Information & Services Items Included (025057)
- 1 × Automatic Melt Index Instrument 110V
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
- Standard shipping cost or free shipping service applies only to the continental United States via UPS Ground or USPS
- Additional shipping costs may apply for Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses, and international locations
- Verify address validity for UPS and USPS services. Costs resulting from incorrect or undeliverable addresses are the buyer\'s responsibility
Handling Time: Processing typically occurs within 1-3 business days following payment clearance. Orders are processed Monday-Friday, excluding weekends and public holidays.
Sales Tax / Customs Duties: Applicable sales taxes or customs duties are not included and must be covered by the buyer where required.
Shipping Damage: Contact us immediately for prompt resolution of any shipping-related damage issues.
Return / Refund Policy
For any satisfaction concerns, please contact us directly. Avoid initiating requests or cases without prior communication.
Returns & Exchanges
- Returns must be completed within 30 days of delivery with items in new, unused condition including all original materials
- Buyer-initiated returns: Buyer covers return shipping with original shipping cost deduction and 15% restocking fee
- Seller-error returns: Full refund including shipping charges provided
- All returns require a Return Authorization (RA) number issued by our team
Defective & Damaged Products
- For damaged or incorrect products, provide images or videos to facilitate prompt understanding and resolution
- Replacements or refunds for defective/damaged products are limited to identical products or purchase price refund
- Report damaged items within 7 days of receipt. All returns require an RA number
Warranty & response
- 6-month equipment warranty (consumables excluded). Technical support available beyond warranty period at reasonable cost
- Buyer responsible for warranty shipping to our facility
- Seller covers shipping to buyer for warranty services
- Committed to customer satisfaction. Contact us promptly for any issues. Positive response is greatly appreciated
On Dec 19, 2025 at 00:40:32 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.