⚡ High-Power MOSFET Trigger Drive Switch Module (XY-GMOS, DC 4–60V, 10A, PWM 0–2.5kHz)
Compact DC electronic switch that lets a low-power control signal (MCU/PLC/PWM/switch) control higher-current DC loads such as LED strips, DC motors, pumps, solenoids, and lamps.
🔧 Key Features
⚙️ 4 Control Methods (use ONE at a time) — High-level trigger, low-level trigger, switch control, and PWM control.
🧠 Dual MOSFET Parallel Output — Two MOSFETs in parallel for lower effective resistance and stronger current handling.
⚡ Wide Voltage Range (DC) — Works with DC 4V–60V loads.
🎛 PWM Compatible — Supports PWM input 0–2.5kHz for speed/brightness control (depending on your load).
🧪 Great for Arduino / Raspberry Pi / PLC — Commonly used to switch or PWM-control DC loads using IO ports.
🔌 Wiring Quick Start (practical + reduces returns)
✅ Connect your control signal according to the mode you’re using (PWM or Trigger), and share GND with your controller when required.
📐 Specifications
🔥 Output Capacity: 10A continuous @ room temperature (rating depends on wiring + cooling)
🚀 With Auxiliary Cooling: up to 15A (heatsinking/airflow required)
🎛 PWM Frequency: 0 – 2.5kHz
🌡 Working Temperature: -40°C to +85°C
📌 Power note (important): “600W” is the theoretical max (e.g., 60V × 10A). Real safe power depends heavily on heat dissipation, terminal contact, and wire gauge.
🎚 Trigger Logic (critical to avoid damage)
⚠️ Use only ONE control input at a time. Using two or more control signals simultaneously can damage the module.
High-Level Trigger Mode
Low-Level Trigger Mode
🧠 Tips for Best Results
✅ Inductive loads (motors/solenoids/pumps): add a flyback diode across the load to protect the MOSFET.
✅ Use short/thick wires for high current; tighten screw terminals firmly.
✅ For 10A+ continuous, plan for heatsinking / airflow (15A requires auxiliary cooling).
✅ Keep PWM within ≤ 2.5kHz for best compatibility.
📦 Package Includes
💥 Volume Discount Offer — Buy More & Save (si lo tienes activado)
🇺🇸 Premium Support & Shipping
🇺🇸 US Stock / Fast Shipping — 2–4 day delivery from Oklahoma, USA. Your purchase supports a US-based small business.
🧪 Quality Checked & Tested — Spot-checked before shipping.
💬 Local Support — English help within hours, not days.
🔁 Easy Returns — 30-day returns; we pay return shipping.
📦 Professional Packaging — Safe delivery, 100% guaranteed.
📝 Footnotes
🧩 One control input at a time: do not mix trigger/PWM/switch signals simultaneously.
🔥 High current = heat: continuous 10A+ requires proper wiring and cooling; “600W” depends on voltage and dissipation.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.