|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
High Density Additive For Screen Printing Plastisol Ink - 32oz Used 1 Scoop
$29.99

High Density Additive For Screen Printing Plastisol Ink - Quart 32oz I only used 1 scoopKey Features: - Plastisol ink additive that creates thick 3D effective
- Drastic raised effect while keeping sharp edges and detail
- High opacity prints
- Must be paired with HV (high viscosity) emulsion
- Prints on cotton, polyester, and poly blends
- Cures at270° Fahrenheit
- Gels around 220° Fahrenheit
Rapid Cure HD (high-density) Additive is a low-temperature cure plastisol ink additive formulated to give your ink a thick 3-dimensional deposit.This high-density additive must be paired with a thick stencil to achieve a 3-dimensional look. Ecotex Tex Red HV and Ecotex Tex Blue HV are both high viscosityemulsions that create a nice thick stencil.Rapid Cure HD Additive is great for creating a dramatic raised look while keepingedges sharp in your art detail.This ink can be used with low temp cure inks or with standard plastisol inks.Directions:When using this product add 40 - 70% by weight to the ink of your choice.1. Add 40 - 70% by weight to the ink of your choice and mix.ex. 50 grams of ink requires 20-35 grams of Rapid Cure HD Additive2. Cure at 270° FahrenheitRecommended mesh count: 60-80 mesh +Cleans up: Ecotex Plastisol Press WashRecommended Storage: 65°-90° Fahrenheit

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|