Heltec V4 Complete Meshtastic NodeCase designed by Alley Cat · Printed by MakerNovaReady-to-Use Heltec V4 Meshtastic Device
The Heltec WiFi LoRa 32 V4 is a compact, powerful LoRa mesh device built around the ESP32-S3 dual-core chipset paired with the SX1262 LoRa transceiver. Designed for Meshtastic, LoRaWAN, Bluetooth 5.0, BLE Mesh, and Wi-Fi communication, this Heltec V4 build is portable, rugged, and ready to go straight out of the box.
Paired with the Alley Cat + MakerNova protective case system, the Heltec V4 becomes a reliable, field-ready communicator capable of 3 to 4 days of runtime per charge, depending on usage and radio duty cycle.
Highlights
- Fully assembled, minimal setup required
- ESP32-S3 MCU + SX1262 LoRa radio
- Wi-Fi 802.11 b/g/n + Bluetooth 5.0 LE / BLE Mesh
- Optional L76K GPS support on Pro variants
- USB-C power, Li-ion battery, and solar charge compatibility
- Swappable antennas and case fronts
- Pocket-sized, rugged, and portable
- Field-tested with MakerNova batteries
What\'s In The Box
- Heltec WiFi LoRa 32 V4 Board
- Antenna (Caterpillar or 17 cm Gizont, depending on model)
- Battery (2000 mAh or 4000 mAh, depending on variant)
- Custom MakerNova case front & back
- Black buttons
- MOLLE or Baofeng-compatible clip
- Lanyard (random color)
- Quick start / assembly card
▸ Technical Specifications Feature Details MCU ESP32-S3R2 Dual-Core Xtensa LX7 (32-bit) Memory 2 MB PSRAM + 16 MB Flash LoRa Radio Semtech SX1262 Frequency Range 863–928 MHz (902–915 MHz typical for US) Transmit Power Up to 28 dBm (≈ 600 mW) Receive Sensitivity As low as −137 dBm @ SF12 Wireless Connectivity Wi-Fi 802.11 b/g/n + Bluetooth 5.0 LE + BLE Mesh Power Inputs USB-C, Li-ion battery, solar charge header (SH1.25-2P) Board Dimensions Approx. 51.7 × 25.4 × 10.7 mm Case Material Durable ASA plastic Typical Runtime Approx. 3 to 4 days per charge (depends on settings and duty cycle) ▸ Case Dimensions
- Pocket: 60 × 40 × 24 mm
- Pocket SMA: 60 × 40 × 24 mm
- Pocket Pro: 65 × 40 × 24 mm
- Pocket Pro SMA: 65 × 40 × 24 mm
- Slim: 70 × 60 × 15.25 mm
- Slim Pro GPS: 89 × 73 × 15 mm
Battery Compatibility
Only tested with MakerNova batteries:
- MakerNova 2000 mAh Li-Po: used in Pocket, Pocket SMA, Pocket Pro, Pocket Pro SMA, and Slim models (approx. 50 × 34 × 10 mm)
- MakerNova 4000 mAh Li-Po: used in Slim Pro GPS for extended runtime
Compatible Antennas
- 2dBi Compact Whip Antenna (internal, used on Pocket, Pocket Pro, and Slim)
- 17 cm Gizont 915 MHz SMA Antenna (used on Pocket SMA, Pocket Pro SMA, and Slim Pro GPS)
Model Variants
Choose the configuration that fits your use case:
Variant GPS SMA Port Battery Best For Pocket No No 2000 mAh Simple portable mesh node Pocket SMA No Yes 2000 mAh Upgradable antennas / better range options Pocket Pro Yes (L76K GPS) No 2000 mAh GPS-enabled mapping, tracking, and location-aware mesh Pocket Pro SMA Yes (L76K GPS) Yes 2000 mAh GPS + external SMA antennas for maximum flexibility Slim No No 2000 mAh Sleek, balanced everyday design Slim Pro GPS Yes (L76K GPS) Yes 4000 mAh Longest runtime + SMA + GPS in a slim form factor
Note: GPS modules require the Pro-style housing (Pocket Pro, Pocket Pro SMA, or Slim Pro GPS). Standard Pocket shells are not GPS compatible.
Color Options
- Custom front plate color (your choice)
- Black rear plate
- Black buttons
- Included clip (Baofeng or MOLLE-compatible)
Quick Setup
- Attach the antenna to the Heltec V4 (only for SMA variant)
- Power on, configure Meshtastic or your preferred firmware with phone or webpage.
Meshtastic® is a registered trademark of Meshtastic LLC. MeshCore is an open-source mesh networking project released under the MIT License, and its name is currently the subject of an unresolved trademark dispute; it is used here only to describe firmware compatibility. Software components referenced in this listing are released under their respective open-source licenses, see GitHub for details. No warranty is provided for open-source software or firmware, use at your own risk. Hardware is covered by our 30-day return policy. Always follow best practices for Li-ion battery safety, RF regulations in your region, and safe device operation.
Material: All colors are 3D-printed ASA except Dark Green PLA+, which is PLA+ (tougher against impact, lower heat resistance).
Shipping, Returns & from Georgia, USA via USPS.
Shipping cost is calculated at checkout based on your location.Local pickup is not available.- 30-day returns, money back.
- Item must be unused, in the condition received, with all original packaging and accessories.
- Item must not be damaged or modified.
- Buyer pays return shipping.
- Payment is handled securely through at checkout.
- Applicable sales tax is calculated by based on the shipping destination.
Questions about fit, compatibility or your order? Send us a message and we will help.
Ask seller a question
You might also likeHeltec V4 Case Collection – Pocket, SMA & Pro Styles17cm Whip AntennaStraight or 90° LoRa Antenna PigtailMakerNova 2000mAh LiPo Battery with JST 1.25
© MakerNova
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.