Heltec T096 Complete Meshtastic NodeCase designed by Alley Cat · Printed by MakerNovaReady-to-Use Heltec T096 Meshtastic Device
The Heltec T096 (Heltec\'s Mesh Node T096) is a compact, ultra-low-power mesh device built around the Nordic nRF52840 MCU, paired with a Semtech SX1262 LoRa transceiver and an onboard UC6580 dual-band GNSS chip. Designed for Meshtastic, MeshCore, and LoRaWAN, with Bluetooth 5 and BLE Mesh connectivity, this Heltec T096 build is portable, rugged, and ready to go straight out of the box.
Paired with the Alley Cat + MakerNova protective case system, the Heltec T096 becomes a reliable, field-ready communicator, and thanks to the nRF52840\'s ultra-low-power design (sleep current as low as 12 µA), it\'s built to stretch runtime well beyond a typical Wi-Fi-equipped mesh node.
Highlights
- Fully assembled, minimal setup required
- nRF52840 MCU + SX1262 LoRa radio
- Built-in dual-band GNSS (UC6580): GPS/GLONASS/BDS/Galileo on every variant
- Bluetooth 5 with BLE Mesh support
- USB-C power, Li-ion battery, and solar charge compatible
- Swappable antennas and case fronts
- Pocket-sized, rugged, and portable
- Field-tested with MakerNova batteries
What\'s In The Box
- Heltec T096 board
- LoRa antenna (Caterpillar or 17 cm Gizont SMA, depending on model)
- Battery (2000 mAh or 3000/4000 mAh, depending on variant)
- Custom MakerNova case front & back
- Clear buttons
- MOLLE or Baofeng-compatible clip
- Lanyard (random color)
- Quick start / assembly card
▸ Technical Specifications Feature Details MCU Nordic nRF52840 (ARM Cortex-M4F) LoRa Radio Semtech SX1262 GNSS UC6580, L1+L5 dual-band (GPS, GLONASS, BDS, Galileo, NAVIC, QZSS) Frequency Range 863–928 MHz (902–915 MHz typical for US) Transmit Power Up to 28±1 dBm (≈ 630 mW) Wireless Connectivity Bluetooth 5 + BLE Mesh (no Wi-Fi) Power Inputs USB-C, Li-ion battery (3.7V, 3.3–4.2V), solar charge header (SH1.25-2P) Board Dimensions Approx. 52.00 × 25.40 × 10.26 mm Case Material Durable ASA plastic Operating Temperature −20°C to 70°C Sleep Current As low as 12 µA ▸ Case Dimensions
- Pocket Pro: 65 × 40 × 24 mm
- Pocket Pro SMA: 65 × 40 × 24 mm
- Slim Pro GPS: 89 × 73 × 15 mm
Battery Compatibility
Only tested with MakerNova batteries:
- MakerNova 2000 mAh Li-Po: used in Pocket Pro and Pocket Pro SMA models (approx. 50 × 34 × 10 mm)
- MakerNova 3000 mAh Li-Po: used in Slim Pro GPS, with right-angle SMA cable (approx. 65 × 36 × 10 mm)
- MakerNova 4000 mAh Li-Po: used in Slim Pro GPS for extended runtime, with right-angle SMA cable (approx. 65 × 40 × 12 mm)
Compatible Antennas
- 2dBi Compact Whip Antenna (internal, used on Pocket Pro)
- 17 cm Gizont 915 MHz SMA Antenna (used on Pocket Pro SMA and Slim Pro GPS)
Model Variants
Choose the configuration that fits your use case:
Variant GPS SMA Port Battery Best For Pocket Pro Yes (built-in GNSS) No (Internal Antenna) 2000 mAh Compact, GPS-enabled everyday carry Pocket Pro SMA Yes (built-in GNSS) Yes 2000 mAh GPS + external SMA antenna for better range Slim Pro GPS Yes (built-in GNSS) Yes 4000 mAh Longest runtime + SMA + GPS in a slim form factor
Note: Every T096 variant is GPS-ready standard. The board\'s onboard UC6580 GNSS chip isn\'t an add-on module like on other platforms. The Pro-style housing provides the internal clearance and antenna routing every variant needs.
Color Options
- Custom front plate color (your choice)
- Black rear plate
- Clear buttons
- Included clip Setup
- Attach the antenna to the Heltec T096 (SMA variants only).
- Power on, then configure Meshtastic, MeshCore, or your preferred firmware from your phone or a web browser.
Meshtastic® is a registered trademark of Meshtastic LLC. MeshCore is an open-source mesh networking project released under the MIT License, and its name is currently the subject of an unresolved trademark dispute; it is used here only to describe firmware compatibility. Software components referenced in this listing are released under their respective open-source licenses, see GitHub for details. No warranty is provided for open-source software or firmware, use at your own risk. Hardware is covered by our 30-day return policy. Always follow best practices for Li-ion battery safety, RF regulations in your region, and safe device operation.
Shipping, Returns & from Georgia, USA via USPS. - Shipping cost is calculated at checkout based on your location.
- Local pickup is not available.
- 30-day returns, money back.
- Item must be unused, in the condition received, with all original packaging and accessories.
- Item must not be damaged or modified.
- Buyer pays return shipping.
- Payment is handled securely through at checkout.
- Applicable sales tax is calculated by based on the shipping destination.
Questions about fit, compatibility or your order? Send us a message and we will help.
Ask seller a question
You might also likeHeltec T096 Case Collection – Pocket, Slim & Pro Styles17cm Whip AntennaStraight or 90° LoRa Antenna PigtailMakerNova 2000mAh LiPo Battery with JST 1.25
© MakerNova
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.