Heathkit IT-28 Capacitor Checker Recapped Calibrated Tested Working Vintage
CONDITION
Used and fully operational. This Heathkit IT-28 has been fully recapped, serviced, and calibrated by me. It has been part of my own workshop collection for several years and has performed reliably. The recap was carried out this year. I have included photos to sow the new capacitors. Two original caps were retained as they are super low value and were perfect tolerance. This meter needs low tolerance in some components.
The magic-eye tube is exceptionally bright, and the instrument has been tested for capacitance measurement and high-voltage leakage. This is its killer feature. The ability to test high voltage leakage.
The front panel is very clean for its age. The cabinet has scratches, marks, and normal cosmetic wear consistent with vintage workshop equipment. Please examine all photographs Model IT-28 Capacitor Checker.
This is not an unknown, untested piece of vintage equipment. It has been part of my own workshop collection and has served me well over the years. I am now reducing the amount of vintage test equipment I own, so it is time for it to go to another workshop or collection.
The IT-28 has been recapped and carefully calibrated by me. Internal photographs are included to document the work and show the condition of the chassis, replacement capacitors, transformer, controls, wiring, and tubes.
The installed 6AX4GTB and 6BN8 tubes are also shown in the photographs. Most importantly, the magic-eye tube is exceptionally bright and evenly illuminated, with near-new brightness. Weak magic-eye tubes are a common problem with vintage capacitor checkers, but this one is excellent.
TESTING AND CALIBRATION
A video included with the listing demonstrates the Heathkit testing a modern Nichicon 10 µF, 450 V electrolytic capacitor for both capacitance and leakage (tested at 100v).
To verify the Heathkit’s accuracy, I tested the same capacitor using two separate modern instruments:
East Tester ET4410 LCR meter: 9.260 µF
Peak Atlas ESR70: 9.17 µF
Heathkit IT-28 bridge: approximately 9.2 µF
The close-up photograph of the Heathkit dial shows how closely its bridge reading agrees with the two modern digital instruments.
The video also demonstrates the capacitor leakage test and operation of the bright magic-eye indicator.
FEATURES
The Heathkit IT-28 is a traditional bridge-type capacitor checker designed for servicing vintage electronic equipment. Its functions include:
Capacitance measurement
Resistance measurement
Electrolytic capacitor power-factor testing
High-voltage capacitor leakage testing
Adjustable leakage-test voltage
Separate settings for electrolytic, miniature electrolytic, paper, mica, and similar capacitors
Bright magic-eye null and leakage indication
Discharge position for safely discharging the connected capacitor after and external-generator connections
It is particularly useful when restoring tube radios, vintage amplifiers, televisions, and other equipment where testing a capacitor for leakage at an elevated voltage is important. A typical low-voltage digital capacitance meter cannot perform that particular test.
COSMETIC CONDITION
The faceplate, markings, scales, controls, knobs, binding posts, and clear dial pointer are all in very presentable condition. The metal cabinet retains its original finish but has scratches, scuffs, and marks from normal workshop use and age. The carrying handle is intact.
Please use the photographs as an important part of the condition description. This is genuine vintage test equipment and is not cosmetically perfect.
WHAT IS INCLUDED
Nothing else is included.
The test leads, Nichicon test capacitor, Peak Atlas ESR70, East Tester ET4410 LCR meter, and all other tools or equipment visible in the photographs or video are shown solely to demonstrate operation and are not included in the sale.
IMPORTANT VINTAGE-EQUIPMENT NOTICE
This is a vintage, manually operated, high-voltage electronic test instrument. It can generate potentially dangerous test voltages and should be purchased and operated only by someone familiar with vintage electronics and appropriate high-voltage safety procedures.
Although it has been recapped, calibrated, and is working correctly at the time of listing, it remains vintage equipment and should not be treated as a newly manufactured laboratory instrument.
It will be carefully packed for shipment, with particular care taken to protect the front panel, controls, tubes, and cabinet.
DUE TO PARTS SWAPPERS AND OTHER SCAMS NO RETURNS OR WARRANTIES.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.