HarWil Flow Switch Model Q-10. #CB50
Purchase is for item as seen in photos.
The Harwil Flow Switch Model Q-10 is an extremely versatile fluid control switch designed to monitor liquid flow across a broad spectrum of industrial, chemical, and commercial spa systems. Operating entirely on fluid flow—independent of line temperature or pressure—it features a compact profile and a low pressure drop.
Because it is highly configurable, purchasing or replacing this switch requires knowing your specific system variables, such as pipe size, cable length, material type (Noryl vs. Fortron), and electrical configuration (Normally Open, Normally Closed, or SPDT).
Key Specifications
• Operating Range: Handles flow rates from 0.9 GPM in 1-inch pipes up to 400 GPM in 10-inch pipes (and up to 1,025 GPM in 16-inch setups for specific variations).
• Body Material Options:
• Q-10N (Noryl): Rated for a maximum temperature of 180°F and 200 psig; ideal for tap water, swimming pools, mild acids, and bases.
• Q-10VCR (Fortron PPS): Rated for higher heat up to 200°F and 250 psig; better suited for aggressive chemicals and hydrocarbons.
• Electrical Options: Uses a magnetically coupled reed switch configuration capable of switching 5 VDC to 240 VAC. Available variants include:
• Normally Open (NO): Closes the circuit when flow begins (frequently used to activate pool heaters or salt chlorinators).
• Normally Closed (NC): Opens the circuit when flow begins.
• SPDT: Double-throw configuration providing both sets of contacts.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.