Haptic Pedal Reactor Adapter – Compatible with Simagic HPR, Black

• CONNECT YOUR UPGRADE — Your haptic unit is ready for your sim racing pedals, but the missing mount stops the installation. This adapter makes that connection, giving your haptic pedal reactor solenoid attachment points on the pedal so you can bring the two parts together at your racing setup instead of leaving the unit beside it while you work out how to attach it.
• BEHIND THE PEDAL — Keep the front face of your sim racing pedals for your feet, with your haptic unit mounted behind the pedal instead. The adapter attaches at the back and holds the reactor there, so the response hardware sits on the opposite side from the surface you press during a race; you know where the unit goes as you plan the mounting work before your next session.
• PLAN YOUR INSTALLATION — Fasten your reactor to the adapter, then attach the adapter to your sim racing pedals for a screw-fastened connection between them.
• KEEP YOUR PEDAL PLATE — Refit the pedal plate over the wafer-head screws after mounting the adapter, so the surface your shoe presses goes back over the attachment hardware. The added plate height is unnoticeable, keeping that installation detail out of your mind when you settle in for a race; your attention stays on pressing the pedal rather than a noticeable change at its face.
• VIBRATION AT YOUR FEET — Bring the vibration from your haptic unit through the pedal to your feet during your next racing session. The adapter holds the unit on the pedal to make that physical connection; your reactor generates the response, while this mount supplies the attachment points, giving each part its own job as you press your sim racing pedals through the laps ahead. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).

A haptic response unit needs more than a spot beside your sim racing pedals. It needs a mounting connection to the pedal itself.

This haptic pedal reactor adapter is the plastic part that makes that connection. It mounts your reactor solenoid behind the pedal, with attachment points between the unit and your sim racing pedals. Your feet stay on the pedal plate while the reactor sits at the back. Once attached, the unit\'s vibrations travel through the pedal to your feet; the reactor creates the response, and the adapter holds it on the pedal.

The connections use separate fasteners for separate jobs. Four M4x15 countersunk screws attach your reactor to the adapter. Four M4x10 wafer-head low-profile screws attach the adapter to the pedal, engaging four M4 heat-set inserts for the pedal mounting screws. Those screws and inserts are required and are not included, so gather the mounting hardware before starting your installation.

Your pedal plate screws back on over the wafer-head screws. The added height is unnoticeable, so you refit the plate over the mounting hardware without a noticeable change in height where your shoe presses. The reactor stays behind the pedal rather than on its front face.

For sim racing enthusiasts building out a home simulator or racing cockpit, this adapter puts the haptic unit on the pedal rather than beside the rig. Use it when adding a reactor to your setup and bringing the pedal and response unit together for the next session. It handles the physical mounting connection, giving your haptic equipment its place behind your sim racing pedals.

HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.