|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Handheld Oscilloscope digital Multimeter 50MHz 2CH 280MS/s 3in1 Signal Generator
$78.99

Descriptions: - Data of Digital Oscilloscope: The Handheld Oscilloscopes is capable of manually adjusting parameters. It is also capable of automatic measurements, recognising uncertain waveforms, automatically adjusting amplitude and time base, and matching waveforms. It also has a vertical system to set the waveform voltage amplitude, scale size, and position.
- Voltage Tester with 3.5-inch IPS colour screen: This Multimeter is capable of measuring DC and AC currents up to 10A; AC voltages up to 750 V; DC voltages up to 1000 V. It can measure resistances up to 600 Ω. Not only that, but it also measures capacitance, frequency, duty cycle, diodes, and on-off.
- Parameters of Lab Oscilloscope: The bandwidth of the Dual-Channel Oscilloscope is 50MHz. its real-time sampling rate is 200M/280MSa/s. the recording length of the horizontal system can be up to 128kbyte. the displacement range of the vertical system is plus or minus four frames.
- Signal Generator with Thoughtful Design: This Multi Tester has a low battery indicator and is designed with a data hold function. Under the multimeter state, a short press on the ‘HOLD/SAVE’ key will keep the current value unchanged.
- Handheld Digital Oscilloscope:This Digital Oscilloscope has two operation modes: Normal Mode 200MSa/s, High Speed Mode 280MSa/s. Two display modes: Y-T, X-Y. And it has five afterglow modes: Minimum, 500ms, 1S, 10S, Infinite.
💡Basic parameters: - Screen size & resolution: 3.5 inches
- Material: ABS PVC
- Backlight: Brightness of the backlight can be adjusted
- Power Supply: TYPE-C(5V/2A)
- Battery: 4000mAh lithium battery
- Language: Chinese, English
- Product size: about 183x100x44mm
- Product Net Weight: about 460g
🔨Multimeter: - DC Current: 60mA/600mA/6A/10A
- AC Current: cycle: Test:Yes
🔧Signal generator - Channel: Single Channel
- Frequency: 1Hz-2MHz
- Amplitude: 0.1V-3.0V
- Square wave duty cycle: 1-100%
- Signal Type: Sine Wave, Square Wave, Triangular Wave, Half Wave, Solid Wave, Sawtooth Wave and DC Signal
🔨 Oscilloscope - Channel:Dual Channel
- Analog Bandwidth:50MHz
- Real-time Sampling Rate:200M/280MSa/s
- Memory length:up to 128kByte
- Input Impedance:1MΩ
- Time Base Range:10ns/div - 20s/div
- Vertical Sensitivity: 20mv/div - 10v/div
- Vertical Resolution: 4 bits
- Maximum Measured Voltage:300V
- Probe: 1x/10x
- Trigger Mode: AUTO/Normal/Single
- Trigger Type: Rising Edge, Falling Edge
- Trigger Level Range: 4 cells (positive/negative)
- Waveform Display Mode: Y-T、X-Y
- Coupling Method: AC/DC
- Measured Data: Period, Frequency, Peak-to-Peak, Maximum, Minimum, RMS, Duty Cycle, Frequency Counter
- Save waveform screenshot:Yes
- Export waveform images from computer:Yes
🎁What\'s included in the package: - 2CH Touchable Oscilloscope Multimeter*1
- Probe *2
- Multimeter probe *1
- Data cable *1
- Product Manual *1
- a carrying bag*1

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|