Manufacturer: Hamamatsu Photonics K.K.
Model: C2400-03
Type: Video Camera for Microscopy / Scientific Imaging
Condition: Used – fully functional, tested
Country of Manufacture: Japan
14-day returns accepted.
Item must be returned in the same condition as received. Buyer is responsible for return shipping.
Overview
Offered for sale is a Hamamatsu C2400-03 video camera system, consisting of the camera head and camera control unit (CCU). This is a professional, laboratory-grade imaging system designed for microscopy, quantitative imaging, and low-light scientific applications.
The system has been fully powered on and tested, producing a stable, clean video image when connected directly to a TV/monitor. Testing was performed using a 25 mm C-mount lens (used in place of a microscope objective for demonstration purposes).
All primary functions — gain, offset, sensitivity, contrast enhancement, shading controls, and video output — operate correctly.
What’s Included
✔ Hamamatsu C2400-03 Camera Head
✔ Hamamatsu C2400 Camera Control Unit
✔ Original camera-to-controller cable
✔ Power cable
✔ Instruction manual (included / provided)
✔ All items shown in the photos
(Lens shown in photos was used for testing only and is not included unless explicitly stated.)
Key Features (from Hamamatsu Vidicon-based imaging system
Contrast Enhancement Circuit with independent gain and offset timing for stable scanning and synchronization
Tube protection circuitry to prevent burn-in
White clipper and video level indicator LEDs
Two composite video outputs (BNC)
Optional support for shading correction, video inversion, video boost, and external sync (depending on installed option boards)
Designed for microscopy and quantitative electronic imaging Specifications (Summary)
Lens mount: 1\" C-mount
Video output: Composite video, 1.0 Vp-p / 75 Ω
Scanning systems:
EIA RS-170 (60 Hz)
CCIR System B (50 Hz)
Video bandwidth: up to 10 MHz
Aspect ratio: 4:3
Power input: AC 100–240 V, 50/60 Hz
Operating temperature: 0–40 °C
(Full specifications available in the included manual) & Condition
System powers on normally
Stable video output confirmed on external display
Front-panel controls respond correctly
No image instability, rolling, or signal loss observed
Cosmetic condition consistent with normal laboratory use (see photos)
This unit is ready to integrate into an existing optical setup or legacy imaging system requiring analog video output.
Typical ApplicationsOptical & fluorescence microscopy
Spectroscopy imaging systems
Scientific & research imaging
Legacy laboratory setups
Important Notice:
This item is professional scientific / laboratory equipment intended for research, industrial, or educational use. It is not a consumer imaging device. Buyer is responsible for proper integration, compatibility, and safe operation within their system.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.