The Firing Problem: Dead primer ignition of rimfire ammo, bolt short-cycling, bad cartridge case ejection, stuck cases in the breech & bent charging handles.
The Solution; HORNET SPEED BOLT for Ruger 10/22 LR
- OEM Ruger bolt body new.
- Super-slick friction-free bolt action.
- Volquartsen A2 steel firing pin with precision cut chiseled point
- Volquartsen Exact Edge Edge extractor
- Volquartsen Recoil Rod with dual recoil springs for light or heavy recoil springs.
- Professionally installed, fitted and custom lubricated for reliable consistent service
- Test fired before shipping.
- Reliable and rugged durability. Hundreds sold since 2001.
This is a custom bundle time tested to produce reliable and consistent cartridge ignition of quality-made rimfire ammunition. The Ruger OEM bolt body and corners are smooth so that fit in the receiver has sufficient play to cycle smoothly without binding or excessive fouling.
Before installation: Clean the barrel bore, breech, receiver interior with solvent and lubricate lightly.
Ammunition recommendation: Avoid greasy bulk ammo that will cause fouling. Use clean burning match grade LR ammunition.
Drop-in Ready: Not a parts kit. This is a completely functional integrated custom bolt assembly professionally fitted and turned. Hand made to order.
Satisfaction Guaranteed: Full refund and free return shipping if not 100% satisfied.
Warranty and Customer Service:12-month warranty covering parts and labor. Fast customer service and phone help.
seller since 2001
International shipping: Not permitted.
Release; BOLT NOTES:1. The Speed Bolt has been test fired before shipping to verify 100% functional reliability as noted below.2. The Speed Bolt was made for the OEM Ruger 10/22 factory-made receiver. This is the reference standard as an OEM product. Use in other aftermarket receivers may vary due to their proprietary manufacturing tolerances. Generally, after-market products are either undersized or oversized for their own products and may cause cycling and ignition malfunctions.3. Installation: We recommend using apadded viseto clamp the barrel/receiver assembly when installing the bolt and charging handle. This makes it easier to drop in the parts. Refer to Ruger 10/22 installation instructions for more details or youtube instructional videos.Hornet Technical Support Services
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.