|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
HOLDPEAK Digital Clamp Meter 6000 Count Multimeter with Auto Range,AC/DC Voltage
$36.99

- ⚡【AC & DC Digital Clamp Multitester】 6000 Counts Auto-range AC/DC amps clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance,capacitance, audible beep continuity, Temperature, diode and Frequency(Hz),Duty Cycle, Data Hold.
- ⚡【Bluetooth APP Clamp Ammeter】 Auto pair with Android / IOS phone,support for real-time measurement reading in Max/Min/Average, with timing and curve graph. And save the measurements in TXT/Excel files for data logging.
- ⚡【AC/DC Inductive Clamp Amp Meter】Neat Bright Backlit LCD display, Big Jaw Caliber Size 1.77 inches. Make sure press “REL” to zero out the meter before clamping, or the meter will show bias numbers without any wire in the clamps due to the magnetic field.
- ⚡【Accurate Voltage Amperage Meter】0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading for low and high current.
- ⚡【Clamp On Live Wire for AC DC Amp Test】To measure amp with ANY clamp meter, you MUST separate the hot and neutral conductors or they will cancel each other out and give a zero amp reading.
- ⚡【Multi-Function Multimeter】With Data hold, LCD Backlight, Relative value, Continuity buzzer,Connect to Phone by APP. Through the Backlight function, you can measure in the darkness and read the data clearly by the large LCD screen.
- ⚡【Safety & Over Load Protection】 HP-570S-APP Clamp Meter is up to the standards of IEC1010 Double Insulation, Pollution Degree 2, Over voltage Category Ⅲ and overload protection. It will show \"OL\" on the LCD if over range.
Product Specification:Range Selection: Auto RangingMax Display: 6000Duty cycle:0.1%~99.9%True RMSTemperature Testing: (K-type sensor, Celsius, Fahrenheit Unit: -20~1000 °C, -4 ~ 1832 °F)Package Includes:- Holdpeak 570T-APP Clamp Meters (Battery NOT Included)
- Test Lead
- English Manual
Features:√ Data Hold YES√ Diode Test YES√ Auto power off YES√ Backlight Display YES√ NCV Testing YES√ True RMS YES√ Overload P rotection YES√Temperature: Celsius, Fahrenheit Unit YES√ Phone APP Connection Voltage:600mV0.1mV±(0.5% of rdg + 2 of rdg + 2 digits)AC Voltage (True RMS):6V1mV±(1.0% of rdg + 3 of rdg + 3 digits)DC Current: 600A100mA±(2.5% of rdg + 10 digits)1000A1A±(3.0% of rdg + 10 digits)AC Current (True RMS): 600A100mA±(2.5% of rdg + 10 digits)1000A1A±(3.0% of rdg + 10 of rdg + 3 digits)6kΩ1Ω±(1.0% of rdg + 2 of rdg + 3 of rdg + 10 digits)60nF10pF±(3.0% of rdg + (5.0% of rdg + 10 digits)600µF100nF±(10.0% of rdg + 20 (0.1% of rdg + 5 ( 3℃+ 1digit )± ( 3% of rdg + 2digits )-4~302℉302~1832℉1℉± ( 5℉+ 2digits )± ( 3% of rdg + 3digits )

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|