HOBO ONSET S-UCC-M006 Pulse Input Adapter w/Cable - Open Box
$69.95

Part Number - S-UCC-M006Electronic Switch Pulse Input Adapter - 6 meters SensorMSRP: $124.00Connects sensors with pulse outputs to data loggers with Smart Sensor inputs; compatible with electronic switch closures; 6 m cable length.
OverviewConnects sensors with pulse outputs to data loggers with Smart Sensor inputs. Compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second). See how the pulse recorder works.
FeaturesPlug-n-play adapter for pulse output sensorsAutomatically recognized by H21, H22, U30, and RX Series data loggers6m cable length (extension cables available)SpecificationsMaximum input frequency: 120 Hz (120 pulses per second)Measurement range: 0 – 65,533 pulses per logging intervalResolution: 1 pulseLockout time: 45 µs ± 10%Recommended input type: Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)Preferred switch state: Active low input Normally openEdge detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)Minimum pulse width: 1 msInput/output impedance: 100 KΩOpen circuit input voltage: 3.3 VMaximum input voltage: 3.6 VUser connection: 24 AWG wires, 2 leads: white(+), black(-)Operating temperature range: -40° to 75°C (-40° to 167°F)Overall cable length: 6.5 m (21 ft.)Housing: Weatherproof PVC housing protects input adapter electronicsHousing dimensions: 14 x 0.95 cm (5.5 x 0.375 in.)Weight: 310 g (11 oz.)Bits per sample: 16Number of data channels: 1Measurement averaging option: No (reports the number of pulses over the logging interval)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.