HLK-LD2450 DC5V 24G Human Presence Inductive Radar Sensor Motion Module New Item DescriptionFeatures1.24 GHz ISM frequency band
2.Integrated intelligent millimeter wave radar chip and intelligent algorithm firmware
3.Precise motion target positioning and tracking
4.Longest detection distance 6m
5. Wall mounting
6. Multiple connection methods, with pin and socket interface
7. LD2450 human body sensor module adopts 24GHz millimeter wave radar sensor technology Specification
Operating frequency band: 24GHz~ 24.25GHz
Power supply requirement: DC 5V, power supply capacity > 200mA
Average operating current: 120 mA
Modulation mode: FMCW
Interface: one UART
Target application: detection and tracking of up to three targets
Detection distance: 6m
Detection angle: 60.
Data refresh rate: 10Hz
Sweeping band width: 250MHz
Ambient temperature: -40 ~ 85°C
Dimension: 15mm x 44 mm Use and configuration
LD2450 module directly through the serial port in accordance with the prescribed protocol for the output of detection results data, the serial output data contains up to three targets position and speed and other information, the user can be used flexibly according to specific application scenarios. The module power supply voltage is 5V, and the input power supply capacity is more than 200mA. The module IO output level is 3.3V. The default baud rate of the serial port is 256000, 1 stop bit, no parity bit. Communication protocol
The communication protocol is mainly used by users who need to do secondary development without the upper demo tool.The LD2450 module communicates with the outside world through the serial port, and the default baud rate of the radar serial port is 256000, 1 stop bit, no parity bit. The radar outputs information about the detected target, including x-coordinates in the area, y-coordinates, and the speed value of the target. 10 frames per second are reported. Installation environment requirements
This product needs to be installed in a suitable environment, the detection effect will be affected if used in the following environment
1. There are non-human objects in the induction area that are in continuous motion, such as animals, continuously swinging curtains, large green plants facing the air outlet, etc.
2. The presence of large area of strong reflective objects in the sensing area, strong reflective objects are facing the radar antenna will cause interference
3. When wall mounting, you need to consider the external interference factors such as air conditioner and electric fan on the top of the room. Installation precautions
1. Try to ensure that the radar antenna is facing the area to be detected, and the antenna is open and unobstructed around
2. To ensure the installation position of the sensor is firm and stable, the shaking of the radar itself will affect the detection effect
3. To ensure that the back of the radar will not have object movement or vibration. Due to the penetrating nature of radar waves, the back flap of the antenna signal may detect the moving objects on the back of the radar. Metal shield or metal back plate can be used to shield the radar back flap to reduce the impact caused by objects on the back of the radar
4. When there are multiple 24 GHz band radars, please do not install them in the direction of the opposite beam, and install them as far away as possible to avoid possible mutual interference. List
1 x Sensor (optional with or without cable)
- Payment Mathod
- Returns Mathod
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive response, and will do the same in return. DO NOT leave negative response without first communication with us. Ple
Returns Policy1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive response, and will do the same in return. DO NOT leave negative response without first communication
responseWhen you satisfied with our product and services please leave us positive response.
If a problem occurs, contact us immediately with any email request. Just contact us using the \" Ask the seller a question\" link on .We will maill bakc within 24hours
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.