HGM6110N Gensets 50/60Hz 1 Pack Generator Control Module for Monitor Controling

Specification:

Product Dimensions: ‎8.23 × 6.54 × 1.73 inchesModel: ‎HGM6110NStyle: ‎‎AutomaticItem Package Quantity: ‎‎1Special Features: ‎‎ErgonomicCompatible Devices: GeneratorConnectivity Technology: USB

Display: LCD(132*64)

Operation Panel:Silicon Rubber

Language:Chinese & English & Others

Digital Input:5

Relay Output:6

Analogue Input:3

Alternator Frequency:50/60Hz

Programmable Interface:USB

DC Supply:DC(8～35)V

Case Dimensions(mm):209*166*44

Panel Cutout(mm):186*141

Operating Temp.:(-25～+70)℃

HGM6110N Gensets 50/60Hz 1 Pack Generator Control Module for Monitor Controling

Specification:

Product Dimensions: ‎8.23 × 6.54 × 1.73 inches
Model: ‎HGM6110N
Style: ‎‎Automatic
Item Package Quantity: ‎‎1
Special Features: ‎‎Ergonomic
Compatible Devices: Generator
Connectivity Technology: USB

Display: LCD(132*64)

Operation Panel:Silicon Rubber

Language:Chinese & English & Others

Digital Input:5

Relay Output:6

Analogue Input:3

Alternator Frequency:50/60Hz

Programmable Interface:USB

DC Supply:DC(8～35)V

Case Dimensions(mm):209*166*44

Panel Cutout(mm):186*141

Operating Start Module, it controls generator to start/stop by remote start signal.

132*64 LCD display with backlight, optional language interface, push-button operation.

Acrylic screen, improved wearable and scratch resistance property.

Silica-gel panel and keys can well adapt to higher and lower temperature.

HGM6100N series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote” (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.

HGM6100N series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc.. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

HGM6100N controller has six variants:HGM6110N/6110NC/6110CAN: Automatic Start Module, it controls generator to start/stop by remote start signal;HGM6120N/6120NC/6120CAN: Based on HGM6110N/6110NC/6110CAN, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.

Note1: HGM6110NC/6120NC has RS485 port, HGM6110N/6120N without. HGM6110CAN/6120CAN has CAN port, HGM6110N/6120N and HGM6110NC/6120NC without.

Note2: HGM6110/6120 is taken as an example to describe in this manual.

Features:

1. 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;

2. Acrylic screen, improved wearable and scratch resistance property;

3. Silica-gel panel and keys can well adapt to higher and lower temperature;

4. With RS485 communication port, can achieve “three remote” functions via MODBUS protocol;

5. With CANBUS port which can be connected to electronic injection with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, rotated speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port.

6. Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system;

7. Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;

Mains Generator

Line voltage (Uab, Ubc, and Uca) Line voltage (Uab, Ubc, and Uca)

Phase voltage (Ua, Ub, and Uc) Phase voltage (Ua, Ub, and Uc)

Frequency HZ Frequency HZ

Load

Current IA, IB, IC

Active power KW

Reactive power KVar

Apparent power KVA

Power factor PF

Generator accumulated energy kWh

8. Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency, over current and over power;

9. Precision measure and display of parameters about engine,

Temp. (WT), °C/ °F

Oil pressure (OP), kPa/Psi/Bar

Fuel level (FL), % Fuel remains L

Speed (SPD), r/min

Battery Voltage (VB), V

Charger Voltage (VD), V

Accumulative running hours

Accumulative start times

10. Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection;

11. With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output;

12. Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use USB interface (or PS485 interface) to adjust them via PC.;

13. Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;

14. Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected;

15. With emergency start function;

16. With flywheel teeth numbers automatic identification function;

17. Power supply range: (8~35)VDC, accommodating to different starting battery volts;

18. All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;

19. With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;

20. Event log, real-time clock, scheduled start & stop pump unit (can be set as start pump unit once a day/week/month whether with load or not);

21. Add rubber gasket between shell and controller screen, the waterproof can reach IP55;

22. Controller is fixed by metal fixing clips;

23. Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation

Especially suitable for the automation system composed by mains and genset.

Package Includes:

1 ×HGM6110N Generator Automatic Voltage Regulator Module

Item SpecificsCountry of Origin United StatesBrand menbagerMPN 1681272Model HGM6110NWarranty 1 YearSpecial Feature ErgonomicCompatible Devices GeneratorConnectivity Technology USBProduct Dimensions ‎8.23 × 6.54 × 1.73 inchesStyle ‎ AutomaticItem Package Quantity ‎ 1Display LCD(132 × 64)Digital Input 5Relay Output 6Analogue Input 3Alternator Frequency 50/60HzDC Supply DC(8～35)VCase Dimensions(mm) 209 × 166 × 44Panel Cutout(mm) 186*141Operating Temp. (-25～ 70)℃Operation Panel Silicon Rubber
PAYMENT

We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.

Local pickup NOT available at this time.

SHIPPING

We process your order within 3 business day upon payment(note: NOT counting holidays or weekends).

International shipping also available, please note by default all international packages does not come with tracking unless upgraded to priority mail.

Package transit time: please expect 3-5 business days within US, 5-10 business days to Canada, up to 20 business days all around the world.

RETURNS

Please read the item description and check the pictures carefully before offerding. Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.

Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.

response

If you have any problem,please contact us firstly.

CONTACT US

If you're looking to buy in bulk or looking for a long term part supplier, please contact me directly.

Shop CategoryStore Home Plant Care & Soil Accessories Grow Tents Weed & Pest Control Folding & Step Ladders Watering Equipment Ropes, Cords & Slings Hardware Cloth & Mesh Landscaping & Garden Materials Garden Seats Outdoor Sports Other outdoor living Home & Garden◈Kitchenware◈Sports & Fitness◈Chainsaw Parts◈Lawn Mower Parts◈Leafblower Parts◈Snowblower Parts◈String Trimmer Parts◈Other Clothing, Shoes & Accessories◈Wedding Dress Livestock Supplies Business & Industrial◈Industrial Control Module◈CNC◈Hand Tools◈Metalworking Supplies◈Generator Accessories◈Decorate◈Other ATV&UTV Parts◈ATV&UTV Suspension system◈ATV8UTV Brake System◈ATV&UTV Pump◈ATV&UTV Carburetor Parts◈ATV&UTV Lighting System◈ATV&UTV Body&Frame◈Other Special Vehicles Boats Motorcycle Parts▷Motorcycle Ignition System♢Motorcycle Ignition♢Motorcycle Ignition Coil♢Motorcycle Fuel Switch♢Motorcycle Ignition Switch♢Motorcycle Starter Fitting♢Others▷Motorcycle Engine System♢Piston Cylinder Control Regulator♢Thumb Oiler♢Others▷Motorcycle Pump♢Fuel Pump♢Others◈Motorcycle Decoration▷Motorcycle Lighting & Lamps♢Tail Lights♢Head Lights♢Turn Lights♢Others▷Motorcycle Transmission & Steering◈Motorcycle Brake Cable◈Others Golf Cart Parts & Accessories◈Golf Charger◈Golf Carburetor◈Golf LED Kit◈Golf Seat◈Golf Seat Cover◈Golf Ignition◈Golf Brake Pads◈Others Yacht Accessories◈Yacht Cover◈Yacht Pump◈Yacht Repair Kit◈Others Excavator Accessories◈Excavator Seat◈Excavator Engine System◈Others Go-kart Accessories◈Go-kart Clutch Kit◈Go-kart Bushing◈Others Tractor parts◈Others Truck Parts Electric vehicle parts Snowmobile Accessories Auto Parts▷Lighting & Lamps♢Foglight▷Exterior Trimming Parts♢Door Handle♢Hinge♢Front Bumper♢Rear Bumper♢Trunk Spoiler Wing♢Bmuper Holder♢Inner Door Panel Handle♢Sun Visor♢Armrest Center Box Cover♢Air Conditioner & Suspension♢Gearboxes, Rack & Pinions♢Tie Rods & Steering Linkages♢Others♢Control Arms&Ball Joints♢Air Suspension Compressor♢Control Arms & Parts♢Lift♢Lift Kits & Parts▷Exhaust & Emission Systems♢Catalytic Converters◈RV, Trailer & Camper Parts▷Transmission & Drivetrain♢Transmission Gear Shift Cable♢Driveshaft♢Clutch & Parts♢Differential♢Transfer Case Assembly♢Drive Shaft Support Bearing♢Axle Housing▷Auto Pumps♢Fuel Pumps & Sending Units♢Water Pumps♢Power Steering Pumps▷Brakes & Brake Parts♢Calipers & Brackets♢Brake Line▷Auto Fuel System♢Fuel Injectors♢Auto Carburetor▷Valves♢Secondary Air & Smog Pumps♢EGR Parts & Valves♢Solenoids Valve♢Control Valve♢Automatic Transmission Parts▷Auto Tools♢Repair Hand Tools♢Truck Tool Boxes▷Auto Engine System♢Valve Cover & Gasket♢Pistons & Rings♢Engine Mounts♢Engine Oil Pan♢Other◈Others OtherHot Item Carburetor For Honda GX390 R1 U1 UT1 (BE89F B) 8302861 16100-Z5R-U71 USD 11.61 100 Pack 80 Grit NO-Hole Sand Paper 5 In Hook Loop Pads Sanding Disc Flocking USD 15.11 72\"x150\' Galvanized Poultry Net Chicken Wire 2\" Holes Rustic Metal Mesh Fencing USD 100.07 10 x 1/4\" In-Line Straight Fuel Gas SHUT-OFF / CUT-OFF VALVES Lawn Mower USD 10.81 100Pcs Universal Multi Tool Oscillating Saw Blades Quick Release Fit All Models USD 30.47 New List Item 100 Pcs 4.5\"×7/8\" 40 Grit T29 Premium Zirconia Flap Disc Sanding Grinding USD 51.93 Hydraulic Pump 37150-36100 35110-76100 72098141 3281125M91 For Kubota L225 L245 USD 72.80 60Pcs Universal Metal Wood Plastic Multitool Quick Release Saw Blades USD 27.15 3/8-1-1/8 Inch Head Expander Tool Hydraulic Tube Swaging Kit HVAC USD 100.93 1686765M91 Hydraulic Pump 1686766M91 For MF Tractor 230 135 150 165 175 180 1080 USD 88.17

Specification:

Product Dimensions: ‎8.23 × 6.54 × 1.73 inches
Model: ‎HGM6110N
Style: ‎‎Automatic
Item Package Quantity: ‎‎1
Special Features: ‎‎Ergonomic
Compatible Devices: Generator
Connectivity Technology: USB

Display: LCD(132*64)

Operation Panel:Silicon Rubber

Language:Chinese & English & Others

Digital Input:5

Relay Output:6

Analogue Input:3

Alternator Frequency:50/60Hz

Programmable Interface:USB

DC Supply:DC(8～35)V

Case Dimensions(mm):209*166*44

Panel Cutout(mm):186*141

Operating Start Module, it controls generator to start/stop by remote start signal.

132*64 LCD display with backlight, optional language interface, push-button operation.

Acrylic screen, improved wearable and scratch resistance property.

Silica-gel panel and keys can well adapt to higher and lower temperature.

HGM6100N series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote” (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.

HGM6100N series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc.. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

HGM6100N controller has six variants:HGM6110N/6110NC/6110CAN: Automatic Start Module, it controls generator to start/stop by remote start signal;HGM6120N/6120NC/6120CAN: Based on HGM6110N/6110NC/6110CAN, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.

Note1: HGM6110NC/6120NC has RS485 port, HGM6110N/6120N without. HGM6110CAN/6120CAN has CAN port, HGM6110N/6120N and HGM6110NC/6120NC without.

Note2: HGM6110/6120 is taken as an example to describe in this manual.

Features:

1. 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;

2. Acrylic screen, improved wearable and scratch resistance property;

3. Silica-gel panel and keys can well adapt to higher and lower temperature;

4. With RS485 communication port, can achieve “three remote” functions via MODBUS protocol;

5. With CANBUS port which can be connected to electronic injection with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, rotated speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port.

6. Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system;

7. Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;

Mains Generator

Line voltage (Uab, Ubc, and Uca) Line voltage (Uab, Ubc, and Uca)

Phase voltage (Ua, Ub, and Uc) Phase voltage (Ua, Ub, and Uc)

Frequency HZ Frequency HZ

Load

Current IA, IB, IC

Active power KW

Reactive power KVar

Apparent power KVA

Power factor PF

Generator accumulated energy kWh

8. Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency, over current and over power;

9. Precision measure and display of parameters about engine,

Temp. (WT), °C/ °F

Oil pressure (OP), kPa/Psi/Bar

Fuel level (FL), % Fuel remains L

Speed (SPD), r/min

Battery Voltage (VB), V

Charger Voltage (VD), V

Accumulative running hours

Accumulative start times

10. Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection;

11. With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output;

12. Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use USB interface (or PS485 interface) to adjust them via PC.;

13. Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;

14. Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected;

15. With emergency start function;

16. With flywheel teeth numbers automatic identification function;

17. Power supply range: (8~35)VDC, accommodating to different starting battery volts;

18. All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;

19. With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;

20. Event log, real-time clock, scheduled start & stop pump unit (can be set as start pump unit once a day/week/month whether with load or not);

21. Add rubber gasket between shell and controller screen, the waterproof can reach IP55;

22. Controller is fixed by metal fixing clips;

23. Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation

Especially suitable for the automation system composed by mains and genset.

Package Includes:

1 ×HGM6110N Generator Automatic Voltage Regulator Module

HGM6110N Gensets 50/60Hz 1 Pack Generator Control Module for Monitor Controling

PAYMENTSHIPPINGRETURNSresponseCONTACT US

We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.

Local pickup NOT available at this time.

We process your order within 3 business day upon payment(note: NOT counting holidays or weekends).

International shipping also available, please note by default all international packages does not come with tracking unless upgraded to priority mail.

Package transit time: please expect 3-5 business days within US, 5-10 business days to Canada, up to 20 business days all around the world.

Please read the item description and check the pictures carefully before offerding. Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.

Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.

If you have any problem,please contact us firstly.

If you're looking to buy in bulk or looking for a long term part supplier, please contact me directly.

On Sep 1, 2026 at 18:42:44 PDT, seller added the following information: