HGM420N Gensets AUTO 1 Pack Generator Control Module for Monitor Controling

Specification:Wattage: 400 wattsFuel Type:Diesel, GasolinePower Source:Fuel PoweredRecommended Uses For Product: CommercialVoltage:240 VoltsSpecial Feature:Remote Control, Advanced Safety FeaturesIncluded Components:Controller, SG485 module, LCD Type:4 StrokeIgnition System Type:ElectronicEngine Displacement: 418 Cubic CentimetersProduct Dimensions: 4.96 × 4.29 × 1.73 inches

Working Voltage:DC8. 0V to 35. 0V, Continuous Power Supply

Overall Consumption:<3W(Standby mode: ≤2W)

HGM420N Gensets AUTO 1 Pack Generator Control Module for Monitor Controling

Specification:
Wattage: 400 watts
Fuel Type:Diesel, Gasoline
Power Source:Fuel Powered
Recommended Uses For Product: Commercial
Voltage:240 Volts
Special Feature:Remote Control, Advanced Safety Features
Included Components:Controller, SG485 module, LCD display
Color:Black
Material:Plastic
Model:HGM420N
Engine Type:4 Stroke
Ignition System Type:Electronic
Engine Displacement: 418 Cubic Centimeters
Product Dimensions: 4.96 × 4.29 × 1.73 inches

Working Voltage:DC8. 0V to 35. 0V, Continuous Power Supply

Overall Consumption:<3W(Standby mode: ≤2W)

Alternator Frequency:50Hz/60 Hz

Speed Sensor Voltage:1.0V to 24V (RMS)

Speed Sensor Frequency:10,000 Hz (max)

Start Relay Output:5A DC28V power supply

Auxiliary Relay Output 1:5A DC28V power supply

Auxiliary Relay Output 2:5A DC28V power supply

Auxiliary Relay Output 3:5A DC28V power supply

Auxiliary Relay Output 4:5A AC250V voltage-free output

Auxiliary Relay Output 5:5A AC250V voltage-free output

Overall Dimensions:130mm x 112mm x 39mm

Panel Cutout:110mm x 90mm

CT Secondary Current:5A (rated)

Storage Condition:Temperature: (-25~70)℃

Protection Level:IP55 Gasket

Description:
HGM400N series genset controllers integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measurement, alarm protection and “three remote” (remote control, remote measuring and remote communication; SG485 module must be fitted). It fit with LCD display, optional languages interface (Chinese, English, Spanish, Turkish, Russian and French), and it is reliable and easy to use. HGM400N series genset controllers adopt micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and set value adjusting and etc. All parameters can be configured from front panel or through USB interface by using PC. It can be widely used in all types of automatic genset control system with compact structure, advanced circuits, simple connections and high reliability.

HGM400N series controller has two types:HGM410N: ASM (Automatic Start Module)пјЊit controls generator to start/stop by remote signal;HGM420N: AMF (Auto Mains Failure), updates based on HGM410N, moreover, has mains electric quantity monitoring and mains/generator automatic transfer control function, especially for automatic system composed by generator and mains.

1. 132×64 LCD with backlight, selectable language interface (Chinese, English, Spanish, Turkish, Russian and French), push-button operation;

2. Improved LCD wear-resistance and scratch resistance due to hard screen acrylic;

3. Silicon panel and pushbuttons for better operation in high/low temperature environment;

4. Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with voltage 120/240V and frequency 50/60Hz;

5. Collects and shows 3-phase voltage, current, power parameter and frequency of generator or mains.

6. For Mains, controller has over voltage, under voltage and loss of phase detection functions; For generator, controller has ov.

Display Type:LCD or LED

AUTO Genset Controller HGM420N for Genset Automation and Monitor Controling.

Low cost AMF controller designed to start/stop a generator automatically.

Suitable for 1-3 phase gasoline and diesel gensets.

Designed for front panel mounting.

Survives cranking dropouts.

Generator protection, built-in alarms and warnings.

High quality and durable.
Good working conditions and easy installation.
Sufficient warranty time and good after-sales service.
Please rest assured to buy products from our shop.

Key Features:
HGM400CAN series genset controller, integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measurement, alarm protection and “three remote” (remote control, remote measuring and remote communication; SG485 must be fitted). It fits with LCD display, optional Chinese, English, Spanish and Russian display interface with easy and reliable operation.

HGM400CAN series genset controllers adopt micro-processing technology with precision parameters measuring, fixed value adjustment, timing and threshold setting and etc. All the parameters can be adjusted from front panel or through programmable interface (USB to LINK, can use SG72 adaptor) via PC. It can be widely used in all types of generator automatic control system for compact structure, advanced circuits, simple connections and high reliability.

HGM400CAN series controller has two types: HGM410CAN: ASM(Automatic Start Module), it controls generator to start/stop by remote start signal; HGM420CAN:AMF(Auto Mians Failure), updates based on HGM410CAN, moreover, has mains electric quantity monitoring, mains/generator automatic transfer control function, especially for automatic system composed by generator and mains. For generator: controller has over/under voltage, over/under frequency and over current detection functions; Precision collect and display parameters about Engine; Control & Protection: automatic start/stop of genset, ATS(Auto Transfer Switch) control with perfect fault indication and protection function; Equipped with CANBUS port and can communicate with J1939 genset. Not only can you monitoring frequency-used data(such as water temperature, oil pressure, speed, fuel consumption and so on) of ECU machine, but also control starting up, shutdown, raising speed and speed droop via CANBUS port; With ETS(Energize To Stop), idle control, pre-heat control, speed raise control and speed droop control function; All outputs are relay-out;

Parameters setting:paramters can be modified and cannot be lost even in case of power outage. all the contrl parameters can be adjusted from the front panel, or by PC via an SG72 adaptor; Multiplex input port 3 and 4 can be used in various fields: input 3 can be used as auxilary input port or fuel level sensor while input 4 can be used as auxiliary input port or configurable sensor; More kinds of curves of temperature,oil pressure, fuel level can be used directly and user can define the sensor curves by themselves. Configurable sensor: can be set as temperature sensor, oil pressure sensor or fuel level sensor, enable the detection of double temperature, double oil-pressure and double fuel level. Multiple crank disconnect conditions(magnetic pickup, oil pressure, generator frequency) are optional. Widely Power supply range:DC(8~35), suitable to different start battery voltage environment; All parameters use digital modulation, abandoning analog modulation of conventional potentiometer, more reliability and stability; Modular design, self-extinguished ABS plastic enclosure, pluggable connection terminals, embedded mounting, compact structure, easy installation.

Package List:
1PC HGM420 Genset Generator Controller

This shop has most of the accessories you need daily life.
You can self-service enquiry or ask us about the accessories you want.

Item SpecificsCountry of Origin United StatesBrand findmallMPN APO353928Wattage 400 wattsFuel Type Diesel, GasolinePower Source Fuel PoweredRecommended Uses For Product CommercialVoltage 240 VoltsSpecial Feature Remote Control, Advanced Safety FeaturesIncluded Components Controller, SG485 module, LCD displayColor BlackMaterial PlasticModel Name HGM420NEngine Type 4 StrokeIgnition System Type ElectronicEngine Displacement 418 Cubic CentimetersProduct Dimensions 4.96 × 4.29 × 1.73 inchesItem model number HGM420NItem model number HGM420NDisplay Type LCD or LEDAlternator Frequency 50Hz/60 HzSpeed Sensor Voltage 1.0V to 24V (RMS)Speed Sensor Frequency 10,000 Hz (max)
Payment

We ship worldwide.
USPS First Class Mail or FedEx shipping, thank you.

Standard Order Processing time:
All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.

Returns

30 DAY MONEY BACK SATISFACTION GUARANTEE
Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please send us a message through to have the product repaired or replaced.

Contact Us

Please send all correspondence through the messaging system.
Messages will be replied within 24 hours.

About us

Thank you for visiting our store. We hope you are satisfied with the item and our service.
Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.

Lighting & Lamps Shop CategoryStore Home Suspension & Steering Lighting & Lamps◈Fog Lights◈Xenon Headlight Ballast◈Headlight◈Fog Lamps cover◈Turn Lights◈Brake Lights◈Truck Light Strip◈Moto Lighting & Lamps◈Others◈Tail Lights Carburetor◈Lawn Mowers Carburetor◈String Trimmers Carburetor◈Blower Carburetor◈Snow Blower Carburetor◈Snowthrower Carburetor◈Saw Carburetor◈Tractor Carburetor◈Motorcycle Carburetor◈ATV Carburetor◈Automobile Carburetor◈Others◈Golf Carburetor◈Gasket◈Intake Manifold Boot◈Rebuild kits Boat◈Steering Shaft Pin◈Yacht Light◈Others Auto Valve◈Pressure Relief Valve◈Air Idle Valve◈Transmission Solenoids◈Control Valve◈Valve Body◈EGR Valve◈Others Motorcycle Valve◈Motorcycle Solenoid Valve◈Motorcycle fuel Switch Valve◈Others Module◈Transmission Control Module◈Headlight Driver Module◈Fan Control Module◈Others Fule Injector Brakes & Brake Parts◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Hand Brake Handle◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Others Car Repair Kit Auto Engine System◈Valve Cover & Gasket◈Oil Cooler◈Engine Timing Cover◈Thermostat◈Turbine Cover◈Oil Pan◈Glow Plug◈Filter Housing &Accessories◈Engine Rocker Arm Shaft Sleeve◈Engine Hood◈Oil Scale◈Others Auto Ignition System◈Spark Plug◈Car Ignition Coil◈Spark Plug Protective Cover◈Ignition Switch◈Car Ignition Module◈Others Auto Hub◈Locking Hub◈Hub Bearing◈Others Motorcycle Ignition System◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting◈Motor Electromagnetic Starter Motorcycle engine system◈Piston Cylinder Fittings◈Camshaft◈Others Auto Actuator◈Air Conditioner Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Hood Catch◈AC Blower Motor◈Clutch Actuator◈Fuel Door Opener Actuator◈Others Auto Motor◈Transmission stepper motor◈Power Window Lift Motor◈Brake Caliper Servomotor◈Transfer Case Gear Motor◈Front Running Board Motor◈Blower Resistor◈Others Auto Inlet & Outlet System◈Air Filter◈Intake Exhaust Valves◈Throttle Body◈Power Brake Booster◈Exhaust And Intake Pipes◈Turbocharger◈Others Auto Circuit Wiring Harness◈Airbag Hairspring◈Positive Battery Cable◈Sensor Harness◈Body Wiring Harness◈Gear Shift Control Cable◈Battery Terminal◈Others Transmission Power Hose◈Others Auto Switch◈Door Power Window Switch◈Neutral Safety Switch◈Combination Lever Motorcycle Control System◈Gearbox Shift Regulator◈Others Auto Sensor◈TPMS Sensor◈Mass Air Flow Sensor◈Oxygen Sensor◈Knock (Detonation) Sensor◈Air Pressure Sensor◈Throttle Position Sensor (TPS)◈Vehicle Speed Sensor◈ABS Wheel Speed Sensor◈Fuel Pressure Sensor◈Crankshaft Position Sensor◈Oil Pressure Sensor◈Camshaft Position Sensor◈Ride Height Sensor◈PDC Sensor◈MAP Sensor◈Exhaust Pressure Sensor◈Coolant Temperature Sensor◈Acceleration Sensor◈Others Motorcycle Pump◈Fuel Pump◈Brake Calipers◈Others Auto Interior◈Plastic Rivets Fasteners◈Trunk Shield◈Sunroof Sunshade Corn◈Armrest Center Box Cover◈Cup Holder◈Inside Door Handle◈Inner Door Panel Handle◈Cigarette Lighter◈Storage Box◈Air Conditioner Vent◈Others◈Floor Mats Exterior Trimming Parts◈Roof Rack◈Running Boards/Side Steps◈Bmuper Grille◈Fender Flares◈Door Handle◈Fuel tank cap◈Hinge◈Front Bumper◈Rear Bumper◈Motorcycle Wiper Blades◈Window Visors◈ Auto body trim panel◈Front bumper trim Auto Pump◈Fuel Pump◈Water Pump◈High Pressure Fuel Pump◈Air Pump◈Power Steering Pump◈Clutch Master Cylinder◈Oil Pump◈Others Business & Industrial▷Industrial Control Module♢Control Valves♢Other▷CNC♢Edge finder♢Drill Bits♢Spring Collet♢Boring Bar♢Mandrel♢Collet Chuck♢Pull Stud♢Quick Change Tool Post♢Drill Chuck♢Drill Chuck Arbors♢Live center♢Vise♢Milling Tools♢Rivet Gun♢Wrenches♢Hydraulic Crimper♢Balance Level♢Drill Bits♢Outside Micrometer♢Casters♢Steel Tape Measure♢Other▷Metalworking Supplies♢Sanding Disc♢Metal Cut Off Wheels♢Flap Discs♢Hose Clamp♢Welding Wire♢Cable♢Piston Driver♢Other▷Generator Accessories♢Automatic Voltage Regulator♢Generator Carburetor♢Other Home & Garden◈Yard, Garden & Outdoor Living◈Lawn Mower Parts◈Chainsaw Parts◈Leafblower Parts◈Snowblower Parts◈Others Radiators & Parts Golf Cart Parts & Accessories◈ Golf car charger◈Others OtherHot Item Carburetor For Kohler CV730 S CV740 S 25HP 27 HP Engine 24853102-S Tractor Carb USD 21.64 DC 36V/48V 350W Electric Bicycle E-bike Scooter Brushless Motor Speed Controller USD 14.64 Carburetor Fit for KOHLER CV12.5 CV13S CV13T CV14 CV14S CV15S Carb USD 11.60 For Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V New USD 11.00 Carburetor For Kohler Carter #16 Carb K90 K91 K141 K160 K161 K181 Engine Motor USD 14.81 Excellent Delivery

New List Item 5 Pack Flowers Pot Plastic Clear Reusable Sturdy Saucer Plant Drip Trays 12\'\' USD 8.83 10 Pack 2 Gallon Classic Square Design Nursery Pot Plastic Plant Flower Pots USD 20.68 27Pc SAE Metric Impact Socket Kit, 3/4 In Drive, 22mm-50mm For Mechanical USD 92.63 G110672 Hydraulic Stabilizer Cylinder Fit For Case Backhoe 580K LH or RH USD 369.84 High Quality Black 10 Pack 10 Gallon Square Plastic Nursery Plant Grow Pots USD 56.97 HGM420N Gensets AUTO 1 Pack Generator Control Module for Monitor Controling

Specification:
Wattage: 400 watts
Fuel Type:Diesel, Gasoline
Power Source:Fuel Powered
Recommended Uses For Product: Commercial
Voltage:240 Volts
Special Feature:Remote Control, Advanced Safety Features
Included Components:Controller, SG485 module, LCD display
Color:Black
Material:Plastic
Model:HGM420N
Engine Type:4 Stroke
Ignition System Type:Electronic
Engine Displacement: 418 Cubic Centimeters
Product Dimensions: 4.96 × 4.29 × 1.73 inches

Working Voltage:DC8. 0V to 35. 0V, Continuous Power Supply

Overall Consumption:<3W(Standby mode: ≤2W)

Alternator Frequency:50Hz/60 Hz

Speed Sensor Voltage:1.0V to 24V (RMS)

Speed Sensor Frequency:10,000 Hz (max)

Start Relay Output:5A DC28V power supply

Auxiliary Relay Output 1:5A DC28V power supply

Auxiliary Relay Output 2:5A DC28V power supply

Auxiliary Relay Output 3:5A DC28V power supply

Auxiliary Relay Output 4:5A AC250V voltage-free output

Auxiliary Relay Output 5:5A AC250V voltage-free output

Overall Dimensions:130mm x 112mm x 39mm

Panel Cutout:110mm x 90mm

CT Secondary Current:5A (rated)

Storage Condition:Temperature: (-25~70)℃

Protection Level:IP55 Gasket

Description:
HGM400N series genset controllers integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measurement, alarm protection and “three remote” (remote control, remote measuring and remote communication; SG485 module must be fitted). It fit with LCD display, optional languages interface (Chinese, English, Spanish, Turkish, Russian and French), and it is reliable and easy to use. HGM400N series genset controllers adopt micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and set value adjusting and etc. All parameters can be configured from front panel or through USB interface by using PC. It can be widely used in all types of automatic genset control system with compact structure, advanced circuits, simple connections and high reliability.

HGM400N series controller has two types:HGM410N: ASM (Automatic Start Module)пјЊit controls generator to start/stop by remote signal;HGM420N: AMF (Auto Mains Failure), updates based on HGM410N, moreover, has mains electric quantity monitoring and mains/generator automatic transfer control function, especially for automatic system composed by generator and mains.

1. 132×64 LCD with backlight, selectable language interface (Chinese, English, Spanish, Turkish, Russian and French), push-button operation;

2. Improved LCD wear-resistance and scratch resistance due to hard screen acrylic;

3. Silicon panel and pushbuttons for better operation in high/low temperature environment;

4. Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with voltage 120/240V and frequency 50/60Hz;

5. Collects and shows 3-phase voltage, current, power parameter and frequency of generator or mains.

6. For Mains, controller has over voltage, under voltage and loss of phase detection functions; For generator, controller has ov.

Display Type:LCD or LED

AUTO Genset Controller HGM420N for Genset Automation and Monitor Controling.

Low cost AMF controller designed to start/stop a generator automatically.

Suitable for 1-3 phase gasoline and diesel gensets.

Designed for front panel mounting.

Survives cranking dropouts.

Generator protection, built-in alarms and warnings.

High quality and durable.
Good working conditions and easy installation.
Sufficient warranty time and good after-sales service.
Please rest assured to buy products from our shop.

Key Features:
HGM400CAN series genset controller, integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measurement, alarm protection and “three remote” (remote control, remote measuring and remote communication; SG485 must be fitted). It fits with LCD display, optional Chinese, English, Spanish and Russian display interface with easy and reliable operation.

HGM400CAN series genset controllers adopt micro-processing technology with precision parameters measuring, fixed value adjustment, timing and threshold setting and etc. All the parameters can be adjusted from front panel or through programmable interface (USB to LINK, can use SG72 adaptor) via PC. It can be widely used in all types of generator automatic control system for compact structure, advanced circuits, simple connections and high reliability.

HGM400CAN series controller has two types: HGM410CAN: ASM(Automatic Start Module), it controls generator to start/stop by remote start signal; HGM420CAN:AMF(Auto Mians Failure), updates based on HGM410CAN, moreover, has mains electric quantity monitoring, mains/generator automatic transfer control function, especially for automatic system composed by generator and mains. For generator: controller has over/under voltage, over/under frequency and over current detection functions; Precision collect and display parameters about Engine; Control & Protection: automatic start/stop of genset, ATS(Auto Transfer Switch) control with perfect fault indication and protection function; Equipped with CANBUS port and can communicate with J1939 genset. Not only can you monitoring frequency-used data(such as water temperature, oil pressure, speed, fuel consumption and so on) of ECU machine, but also control starting up, shutdown, raising speed and speed droop via CANBUS port; With ETS(Energize To Stop), idle control, pre-heat control, speed raise control and speed droop control function; All outputs are relay-out;

Parameters setting:paramters can be modified and cannot be lost even in case of power outage. all the contrl parameters can be adjusted from the front panel, or by PC via an SG72 adaptor; Multiplex input port 3 and 4 can be used in various fields: input 3 can be used as auxilary input port or fuel level sensor while input 4 can be used as auxiliary input port or configurable sensor; More kinds of curves of temperature,oil pressure, fuel level can be used directly and user can define the sensor curves by themselves. Configurable sensor: can be set as temperature sensor, oil pressure sensor or fuel level sensor, enable the detection of double temperature, double oil-pressure and double fuel level. Multiple crank disconnect conditions(magnetic pickup, oil pressure, generator frequency) are optional. Widely Power supply range:DC(8~35), suitable to different start battery voltage environment; All parameters use digital modulation, abandoning analog modulation of conventional potentiometer, more reliability and stability; Modular design, self-extinguished ABS plastic enclosure, pluggable connection terminals, embedded mounting, compact structure, easy installation.

Package List:
1PC HGM420 Genset Generator Controller

This shop has most of the accessories you need daily life.
You can self-service enquiry or ask us about the accessories you want.

PaymentShippingReturnsContact UsAbout us

We ship worldwide.
USPS First Class Mail or FedEx shipping, thank you.

Standard Order Processing time:
All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.

30 DAY MONEY BACK SATISFACTION GUARANTEE
Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please send us a message through to have the product repaired or replaced.

Please send all correspondence through the messaging system.
Messages will be replied within 24 hours.

Thank you for visiting our store. We hope you are satisfied with the item and our service.
Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.

All rights reserved.

On Nov 9, 2026 at 13:05:48 PST, seller added the following information: