Exact item shown: Graphtec WR7700 Thermal Arraycorder / Data Recorder
Exceptionally clean Graphtec WR7700 8-channel Thermal Arraycorder with factory-installed RS-232C communications interface.
I was told this recorder was unused - I can\'t verify that, plus I used it to test it, but it is clearly much cleaner than a recorder that had been used much, both inside and out. The photos show you both the outside, and before powering I opened the unit to look for leaky capacitors or other age related troubles and found none - the interior photos show you how very clean it is inside.
After inspection, I powered the unit up. It powers on normally, boots to WR7700 Ver. 2.2, responds properly to front-panel controls, advances chart paper correctly, and successfully prints both configuration reports and chart traces. Startup screens, operating displays, and sample printouts are included in the photographs.
The internal photographs show exceptionally clean original circuit boards with very little dust, bright component leads, clean connectors, and no obvious capacitor leakage, corrosion, battery leakage, modification, or repair damage found. The interior condition is substantially cleaner than typically encountered in industrial instrumentation of this Unit powers on normally
• Boots to WR7700 Ver. 2.2• Front-panel controls and menus respond properly• Internal clock/calendar functions• Thermal paper feed operates correctly• Configuration reports successfully printed• Recorder produces chart traces• Factory-installed RS-232C communications interface present• Listing video shows chart paper advancing and recording at 25 mm/minThe included video shows the chart transport and recording operation, while the photographs show startup, menu operation, printed output, internal condition, rear-panel configuration, and installed options.
PRINTER NOTES
The installed thermal paper is quite old, possibly original. Initial print density was light; however, print output became noticeably darker as paper from deeper within the roll was used. The recorder produces readable reports and chart traces. Fresh thermal paper may further improve print quality.
ADDITIONAL OBSERVATIONS
- • Serial Number: 9018489
- • Rear factory label includes a handwritten type designation appearing to read \"WR778\"
- • Recorder identifies itself as WR7700 on the front panel, startup screen, and printed reports
- • Approximate 1990 production based on observed component date codes
- • Factory 40th Anniversary badge Graphtec WR7700 Thermal Arraycorder
- • Installed thermal paper roll
I have included some original Graphtec accessory/option documentation. A complete PDF of the accessory documentation is available from several internet sites, this is one: I didn\'t find a complete user manual, just one page of it hosted on many sites. That one page is the last image in this listing.
PLEASE NOTE
This is vintage industrial test equipment approximately 35 years old. The functions described above were successfully tested; however, I would not consider this a thorough or \"calibration quality\" test.
Please review all photographs and video carefully, as they form an important part of the description and document the condition and operational testing performed.
Note to me: bottom shelf of gray 2-door cabinet
I normally ship within 24hours of your order, but the post office does not alwaysinitiate tracking when Iput the packages in the drop off box.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.