Geomembrane Welding Machine, Automatic Climbing Welding Machine, Hot Wedge WelderDescription
A professional-grade climbing welding machine can double the efficiency of your welding tasks. Equipped with a high-power heating element and an intelligent control mechanism, it delivers rapid heating and precise temperature regulation—boosting welding efficiency while offering consistent results. It also supports adjustable temperature, pressure, and speed settings, making it suitable for welding a wide range of materials and thicknesses.
Flexible Customization: Offering control over pressure, temperature(32-932℉), and speed(1.64-16.4ft/min), it allows flexible customization according to different membrane material thicknesses, helping you reach the exact performance you need.
Enhanced Safety: Equipped with dedicated power supply and motor fuses, this machine provides reliable protection for both the device itself and the users.
Security Defender: It comes with dedicated power supply and motor fuses, delivering safe and reliable safeguards for users and the machine alike.
Application
It can be widely used in many engineering fields such as tunnels, subways, water conservancy, bridges, reservoirs, construction, landfill, and mine sewage treatment.
Specifications
Color: Red, Black
Material: Alloy, Silicone, Rubber
Power Source: Corded Electric
Plug Type: US Standard
Voltage: 110V, 50Hz
Power: 800W
Lap Width: 10cm/3.94in
Welding Material Thickness(Rubber Wheel): 0.2-1.5mm/0.01-0.06in
Welding Seam Width: 2*12.5mm/0.49in, 12mm/0.47in(Inspection Seam)
Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction)
Welding Speed: 0.5-5m/1.64-16.4ft/min
Heating Temperature: 0-500℃/32-932℉
Insulation Class: ll
Power Fuse: 4A
Motor Fuse: 1A
Product Size: 31*14*21cm/12.2*5.51*8.26in
Package Size: 50*50*50cm/19.69*19.69*19.69in
Gross Weight: 8kg/17.64 lbs
Net Weight: 7.6kg/16.76 lbs
Package Included
1* Climbing Welding Machine
1* Toolbox
1* English Manual
Other Accessories for Use
Notes
1. Please read the manual carefully before using it.
2. Please note that it is forofferden to press the two pressure rollers together to run idly.
3. Please adjust the speed according to the welding effect. Higher temperature, faster speed, vice versa, lower temperature, slower speed (Try not to set the speed and temperature to the middle value. Set the temperature first when switching on the machine. If the material is thin or if it is the first time you operate the machine, set the temperature lower when switching on the machine).
4. After the welding is finished, please level the lever immediately to separate the upper and lower pressure wheels (to prevent the high temperature from burning the pressure wheels), then set the temperature to the lowest, and finally switch off the machine and unplug it from the power supply.
5. Please allow the slight color difference caused by the shooting light and the 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
PaymentDelivery detailsTerms of salesAbout usContact usPaymentDelivery detailsShipping:2-9 working days to: USATerms of sales- We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usMonday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions.Welder TypeClimbing Welding MachineMPNDoes Not ApplyBrandUnbrandedItem TypeAuto Welding MachineLap Width10cmVoltage110V 60HzWelding Material ThicknessRubber Wheel 0.2-1.5mmWelding Seam WidthTwo 12.5mm, Inspection Seam 12mmPower800WWelding Strength≥85% Base MaterialWelding Speed0.5-5m/MinHeating Temperature0-450℃Scope Of ApplicationSuitable For Pe, Pvc, Hdpe, Eva, PpProduct Size31*14*21cm (12.20*5.51*8.26inch)Whole Machine Weight5Kgshipping noticeCan not ship to Puerto Rico,Alaska/HawaiiInput Voltage110 V