Hello all,
This listing is for Genuine OEM Volvo™ Remote Entry Key Fob\'s part number 21392420.
If unsure if your Volvo tractor is applicable with keyless remotes, please verify with your local dealer with your VIN# to see if equipped.
Key Fobs were ordered in access accidently and are being moved at a discount. Fobs may have light scratches / skuffs but are all functunal as new. Key fobs were ordered direct from our Bruckner Volvo dealer network.
\"PLEASE NOTE\" battery sold seperately and will not be included in purchase due to shipping restrictions. Key Fob\'s will require a \"CR2032\" model battery.
Programming Information / Details below:
These keys will work the exact same as a new OEM remote ONCE programmed. These keys will need to be programmed to your vehicle. They will NOT WORK out of the package.
Please see the Programming directions below:
8319-22-03-01RemoteControl Central Locking, Programming
You must read and understand the precautions and guidelinesin Service Information, group 80, \"General Safety Practices\" beforeperforming this procedure. If you are not properly trained and certified inthis procedure, ask your supervisor for training before you perform it.
Programming new remote controls (maximum 8 remotes):
- Turn the ignition key to the drive position and then off again 4 times. Stop on the fifth movement in the ON position.
Note:This step should becompleted within a 15 second time frame.
- The direction indicator lamps remain on and the system is now ready to be programmed.
Note:The Instrument clusterdoes not indicate programming mode.
- Press button 1 or 2 on the original remote control.
Note:It is recommended thatat least one remote control to be secured at all times, to avoid thereplacement of the module-remote control pair, if both original remote controlsare missing.
Note:This step is a securityfeature.
Note:No reprogramming ispossible without an original remote control.
- The direction indicator lamps turn off for approx. 0.5 second to indicate that the module has recognized the original remote control.
- Press button 1 or 2 on each remote control that is desired to be programmed.
- The direction indicator lamps go out for approx. 0.5second to indicate that the new remote control has been added.
- To program the next remote control repeat Step 5. The system will exit programming status after 15seconds if no additional remote controls are programmed. This is also the maximum time between activating the remote controls within a programming cycle. The system will also exit after eight remote controls are programmed.
- When the remote control returns to the \'Normal\' mode, If no buttons are pressed, then the last remote controls programmed, remain current for the system.
Note: Due to the security feature, alldesired remote controls to be programmed must be programmed, before theprogramming mode is exited into the Normal mode. To add a new remote controland keep the previous ones, all steps must be taken again having all thecontrols ready. The module starts each programming process anew.
- If you encounter any issues with programming the remote following the instuctions above. Please contact your local professional locksmith for assistance in reprogramming.
Thank you for viewing!
TXMB Parts
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.