- Store
- New Arrivals
- Add to Favorite
- View response
- Contact
Genmitsu Wireless Z-Axis Probe Tool Setter for CNC Router Machine, Tool Setting Touch Probe with 3-Pin Cable DC 5–24V, 0.02Mm Accuracy, GRBL & Mach3 & Genmitsu APP CompatibleDescription Manufacturer Genmitsu Part Number WZ5 Item Weight 5.9 ounces Package Dimensions 4.96 x 2.87 x 2.52 inches Item model number WZ5 Batteries 1 CR2032 batteries required. (included) Power Source Battery Powered Item Package Quantity 1 Included Components Wireless Z-Axis Probe Tool Battery Cell Type Lithium Ion
Product description
Upgrade your workflow with the Genmitsu Wireless Z-Axis Tool Setter. Designed for desktop CNC routers, this high-precision touch probe offers 0.02mm accuracy and a 20m Bluetooth range for cable-free operation. It features a durable stainless steel plate and a safety spring to prevent tool damage. Includes cables for specific Genmitsu models and a universal 3-pin open header for GRBL/Mach3 systems (5-24V). Efficiently powered by a CR2032 battery for 3,000 sets. Perfect for precise milling.
Note: For the 3030 series, additional settings are required for compatibility. Please reach us for more information.
Software Compatibility
The wireless tool setter can be controlled directly from the Genmitsu App, Candle, UGS, and other GRBL or Mach3-based CNC control software.
Simple Operation
A built‑in signal light shows probe status at a glance, lighting up whenever the touch probe is active or triggered.
Flexible Installation
The wireless receiver has a rear magnet for quick mounting on metal surfaces, plus included double‑sided tape for attaching it almost anywhere.
Plug-and-Play
Quick setup with plug-and-play design and step-by-step instructions—no complex wiring needed.
Use the Universal Cable to Connect
Compatible with a 3-pin open Z-probe port and different from the wiring sequence mentioned above.
Note: The actual wiring sequence should align with the probe interface pinout of your control board. Users must adjust accordingly based on their specific control board configuration. The probe interface voltage must remain within the range of 5-24V; exceeding this range may damage the device!
Easy Set Up on Software
- Gsender and UGS: input the height value into \"Z Thickness\" directly
- Genmitsu APP: input the height value into parameter
- Candle: enter the following code into the \"Probe command\"
G21 G91 G38.2 Z-50 F50; G92 Z38.25 —Input the height value
G1 G90 Z40.000 F200 —The lift height of the Z-axis after probing
G91 G38.2 Z-50.000 F20; G92 Z38.25 —Input the height value
G1 G90 Z45.000 F200 —The lift height of the Z-axis after probing
Specification Operating Voltage DC 5V - 24V Operating Current Average 100mA, Typical 30mA Wireless Range 20 Meters Maximum Supported Load 24V / 500mA Operating Voltage DC 2.4V - 3.6V Battery Type CR2032 Battery Capacity 20mA Probing Cycles Approximately 3,000 per Full Battery (varies depending on battery condition) Repeatability Accuracy 0.02mm XH2.54-3 Pin Terminal Cable Compatible with Genmitsu 3018-PROVer V2, 3020-PRO MAX V2; 3020-PRO Ultra; 4040 RENO; 4040-PRO; 4040-PRO MAX 3-Pin Open Header Cable (Gray: 5-24V, Black: GND, Black: IN) for connecting to most GRBL and Mach3 control boards. Note: Operates on Normally Open (NO) logic Package List
- 1 x Probe Tool Module
- 1 x Signal Receiving Module
- 1 x 200mm XH2.54-3 Pin terminal cable
- 1 x 200mm 3-Pin open header cable
- 1 x Double-sided Adhesive Pad
- 1 x User Manual
- Genmitsu Wireless Automated Z-Axis Tool Setting: The Genmitsu Z-axis probe enables your CNC machine to automatically find the surface zero point within 0.02mm accuracy, guaranteeing perfect first-layer results every time Z-Probe Kit
- Seamless Genmitsu Fit: Comes with a 200mm XH2.54 3-pin terminal cable designed for Genmitsu CNC routers: 3018-PROVer V2, 3020-PRO MAX V2; 3020-PRO Ultra; 4040 RENO; 4040-PRO; 4040-PRO MAX; 3030-PROVer Max and 3030-PROVer Ultra (For the 3030 series, additional settings are required for compatibility. Please reach us for more information). No cutting or soldering required
- Universal DIY Compatibility: Includes a 3-pin open header cable for connecting to most GRBL and Mach3 control boards. Note: Operates on Normally Open (NO) logic.
- Wireless Freedom: Enjoy a clean desktop with stable wireless transmission (up to 20m range), eliminating messy cables and alligator clips. It works perfectly on both conductive (metal) and non-conductive materials (wood, acrylic, plastic), greatly simplifying your tool-changing workflow.
- Safety Design: The built-in spring under the touch plate structure absorbs impact to prevent router bit breakage, ensuring safe operation.
ABOUT US
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.
WE ACCEPT
Copyright © 2021 AutoDS. | All Rights Reserved
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.