Generator Controller Generator Electronic Controller Module Control Panel LCD...

Generator Controller Generator Electronic Controller Module Control Panel LCD Display Manual Start & Stop Module

LCD DISPLAY : The controller screen is a 132 x 64 pixel LCD display for easy reading of data.

ACCURATE DISPLAY OF TIME: This controller accurately displays the time and recording time.

PRESET FUNCTION: The preset function allows the controller to preset multiple start and stop cycles for ease of use.

MAINTENANCE REMINDER: This controller can preset the maintenance cycle reminder function.

REMOTE MONITORING: The controller can be remotely monitored via the network with high (using DSE855).

Specification: Material: Plastic Weight: 837g/ Model: Power supply: DC 8~35V continuous Start relay output:16AmpDC system DC voltage Fuel relay output: 16Amp DC system DC voltage Auxiliary relay output: 5Amp DC system DC voltage Operating temperature range: -30 ~ +70C Charging failure/excitation range: 0V~35V Maximum operating current: 425(12V); 215MA (24V) Starting voltage drop: when the voltage provided before starting is not less than 10V and the voltage recovery voltage reaches 5V, the control system can be ensured to maintain normal after 50ms of 0V voltage. There is no need to add a built-in battery.
DSE 5110 controller display parameters: Generator phase voltage L1-N, L2-N, L3-N; Generator line voltage L1-L2, L2-L3, L3-L1; Generator current L1, L2, L3; Generator frequency Hz; Generator speed RPM; Engine Oil Pressure (PSI & Bar); Engine water temperature (℃ & ° F); Battery Voltage Unit operating time; controller alarm/ stop : Underspeed/ overspeed, alarm/ stop; Battery charging failure, alarm; Emergency stop;stop; Low oil pressure, alarm/ stop; High water temperature, alarm/ stop; Start failure, alarm; Speed loss, stop;
Package List: 1 x Generator Controller
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.