Generator Controller Engine Remote Monitoring Control Unit Original DC42DR MK4

Generator Controller Engine Remote Monitoring Control Unit Original DC42DR MK4

1.Summary

This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting.

3.0 inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly.

There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB\\RS485to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.

2.Main Features

There arefiveModels under DC40D MK4series.

Model

USB

RS485

AMF

ABF

DC40D MK4

●

━

━

━

DC42D MK4

●

━

●

━

DC40DR MK4

●

●

━

━

DC42DR MK4

●

●

●

━

DC42DR-ABF MK4

●

●

●

●

32bit high performance single chip microcomputer.

3.0 inch 128 * 64 high-resolutionscreen LCD, Available in 16languages, user’s language set if necessary.

Adopting PC material panel, effectively waterproof, oil-proof, UV-proof, good operating feel and long service life.

AMF: Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.

ABF function: automatically starts and stops the genset by monitoring the backup battery pack;

Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.

Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)

Sensor can be self-defined by front face button or PC software.

USB Port: parameters can be set even without power through USBport to monitor in real time.

With RS485 communication port, can achieve “Three Remote” functions via MODBUS protocol.

Input/output function, status can be shown directly.

More categories of surface setting.

Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.

Maintenance countdown function, which can set the maintenance time or date.

The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.

Has an operation log function that can save 5000 user operation records;

It has anrunningrecord function, which can save 5000 gensetrunningrecords;

Totally 6relay’s output, among which 4relay output can be self-configurable, each relay can be set as max 30 functions, besides, there are 2groups as non-contact terminals.

With 5 switchesinput, up to 10 functions optional;

3sensor simulation input connectors,and various display units can be configured.

Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.

Standard water-proof rubber gasket. The waterproof can reach IP65.

Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.

Parameters

Options

Parameters

Working voltage

DC8V----36V Continuous

Power consumption

Standby:24V:MAX 1W

Working:24V:MAX 5W

AC Voltage Input

1P2W 30VAC-360VAC (ph-N)

2P3W 30VAC-360VAC (ph-N)

3P4W 30VAC-360VAC (ph-N)

Rotate speed sensor Frequency

1-10000Hz

MAX Accumulating Time

99999.9Hours（Min Store time:6min）

Fuel Relay Output

Max 5Amp DC+VE Supply voltage

Start Relay Output

Max 5Amp DC+VE Supply voltage

AUX. Output1

Max 5Amp DC+VE Supply voltage

AUX. Output2

Max 5Amp DC+VE Supply voltage

AUX. Output3

250V/5AMP Non-contact normally Openoutput

AUX. Output4

250V/3AMP Non-contact normally Closed output

Excitation output

DC+VE supply voltage

Switch value input

Available if connecting with Battery -

Battery pack voltage input

0-100VDC(only forDC42DR-ABFMK4)

USB

Type-B

RS485

Isolated Modbus-RTU protocol

Working condition

-25ºC ~+65 ºC

Storage condition

-40-85℃

Protection Level

IP65:when waterproof rubber gasket is added between controller and its panel

Insulation strength

Apply AC2.2kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.

Overall dimension

189mm×134mm×50mm

Panel cutout

160mm×120mm

Weight

0.68Kg