Gen 4 Stripped MKII Bullnose RMR Cut Slide For Glock 19 Gen 1,2,3,4 G19 9MM

Item Description

• BLACK MKII RMR-CUT SLIDE FOR GLOCK 19 — COMPATIBLE WITH GEN 1–4

  Our design team understands tight tolerances, clean lines, and enhanced performance. In today’s market, however, style must be supported by function.

  The MKII Glock 19 slide features an aggressive, lightweight design with front and rear serrations, angled machining, and dimples positioned at approximately 10 and 2 o’clock. These features provide improved gripping surfaces for slide manipulation using either fine or gross motor movements.

  The slide also features a ported top that aligns with compatible Glock 19 ported barrels, making the top opening both visually appealing and functional. A left-side window above the barrel lug helps balance the slide while further reducing its overall weight.

  At approximately 8.8 ounces, the MKII slide is about 22% lighter than our standard-cut slides. It is 100% American-made from 416 stainless steel and heat-treated to 42–44 HRC for optimal strength and durability.

  IMPORTANT GEN 4 COMPATIBILITY NOTICE:

  This MKII slide is compatible with Glock 19 Gen 1, Gen 2, and Gen 3 frames. It is also machined to fit a Glock 19 Gen 4 frame.

  However, this slide uses Gen 3-compatible internal slide components and a Gen 3-style recoil spring/guide rod. A Gen 3 recoil spring/guide rod is included for buyers installing the slide on a Gen 4 frame.

  A complete Gen 3 upper slide parts kit is not included.

  This slide is not compatible with Glock Gen 5 frames.

  GEN 4 FRAME FEATURES:

  • Machined for compatibility with Glock 19 Gen 4 frames

  • Includes a Gen 3 recoil spring/guide rod for Gen 4 installation

  • Uses a Gen 3-compatible upper slide parts kit

  • Right side of the slide features a recessed edge to accommodate the Gen 4 amofferextrous slide-release area

  • Accepts an amofferextrous slide release when installed on a compatible frame

  PRODUCT SPECS:

  • Caliber: 9mm Luger

  • Overall Length: 6.74 inches

  • Weight: 8.8 ounces (approximately 9 ounces)

  • Material: 416 stainless steel

  • Heat Treatment: 42–44 HRC

  • Compatible Model: Glock 19

  • Frame Compatibility: Gen 1, Gen 2, Gen 3, and Gen 4

  • Internal Parts Compatibility: Gen 3-style upper slide parts

  • Recoil System: Gen 3-style recoil spring/guide rod

  • Optic Cut: Trijicon RMR footprint

  • Optic Retention Threads: 6-32

  • Sight Cuts: Standard Glock-pattern front and rear sight cuts

  • Finish: H-190 Graphite Black Cerakote

  • Country of Manufacture: USA

  PRODUCT FEATURES:

  • New lightweight MKII design

  • Approximately 22% lighter than our standard-cut slides

  • Aggressive machined cuts and angles

  • Ported top compatible with appropriately aligned Glock 19 ported barrels

  • Left-side window above the barrel lug for improved slide balance

  • Front and rear slide serrations

  • Additional gripping dimples at approximately the 10 and 2 o’clock Trijicon RMR optic cut

  • Standard Glock-pattern front and rear sight cuts

  • Fits Glock 19 Gen 1, Gen 2, and Gen 3 frames

  • Fits Glock 19 Gen 4 frames when assembled with Gen 3-compatible upper slide components

  • Includes a Gen 3 recoil spring/guide rod for Gen 4 416 stainless-steel construction

  • H-190 Graphite Black Cerakote finish

  • Made in the USA

  OPTIC COMPATIBILITY:

  The slide is precision-machined for the Trijicon RMR footprint with 6-32 threaded optic-retention holes. It is compatible with:

  • Trijicon RMR and SRO

  • Holosun 407C, 507C, and 508T

  • ADE RD3-019 Stingray

  • ADE RD3-020 Raptor

  • ADE RD3-023 Valkyrie Gen 2

  • Other red-dot sights using the same RMR footprint

  WHAT IS INCLUDED:

  • One Glock 19 MKII RMR-cut stripped slide

  • One Gen 3 recoil spring/guide rod

  PLEASE NOTE:

  • This is a stripped slide, not a complete slide assembly.

  • A complete Gen 3 upper slide parts kit is not included.

  • The barrel, sights, and red-dot sight are not included.

  • Gen 4 installation requires Gen 3-compatible upper slide components and the included Gen 3 recoil spring/guide rod.

  • This slide is not compatible with Glock Gen 5 frames.

  • A ported barrel is not included.

  • Professional installation or installation by a qualified gunsmith is recommended.

  • Verify proper fit and safe operation before use.

  OPTIC INSTALLATION:

  Use the correct-length screws for your specific optic. Tighten the optic mounting screws to the optic manufacturer’s recommended torque specification. Applying one small drop of blue removable threadlocker is recommended.

  Because aftermarket frames, barrels, internal components, sights, and optics may have different manufacturing tolerances, minor fitting may occasionally be required.

We carry 2 ADE red dots and 1 ADE Green dot fit this RMR cut slide. Contact us for a 10% off coupon code to purchase one of the three sights in the links below. Send seller an message after purchased the slide, we will reply the code.Gen 2! ADE Valkyrie GREEN Dot CLICK HERE For Pistol with Trijicon RMR/SRO Footprint redBrand New
ADE RD3-019 STINGRAY Red Dot CLICK HERE Sight For Pistol with Trijicon RMR/SRO FootprintBrand NewADE RD3-020 RAPTOR Red Dot CLICK HERE For Pistol with Trijicon RMR/SRO Holosun FootprintBrand New

Payment

We accept any payment method allows such as paypal at the checkout.

Shipping

We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day.

Free shipping within 1 business day with tracking number.

No international shipping!

Other

You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange.

If you have any question, please click contact seller. We always reply emails within 8 hours.

Purchase Eligibility

We have to accept the fact that things are different than when we were younger, so please make sure you can legally order and possess this item BEFORE you submit your offer. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item.

Track Page Views With
Auctiva\'s FREE Counter