Geekworm X1001 PCIe to M.2 Key-M NVMe Board for Raspberry Pi 5

The X1001 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
Compatibility: Pi 5 PCIe M.2 HAT only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC (NOT include Raspberry Pi 5), NVMe base for Raspberry Pi 5, Model: X1001, the matching case is P579
M2 Key-M NVMe SSD Supported: Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation; Comes with SSD copper pillar for 2230/2242/2260 SSD installation
User Manual and FAQ: Google WiKi and search X1001 and its FAQ; Refer to the FAQ to do troubleshoot step by step if can\'t boot/recognize from NVMe SSD
Designed as a basic PCIe expansion board for the Raspberry Pi 5, the X1001 features limited standalone hardware functionality and requires proper OS configuration, stable FFC cable connection, and compatibility between firmware and SSDs for reliable operation.
Power Supply Requirements: The X1001 is powered directly through the PCIe FFC ribbon cable. For stable operation, use the Raspberry Pi 5 PD 27W USB-C Power Supply (5.1V/5A). Note: Standard phone chargers may not provide sufficient power for NVMe SSDs, which can result in SSD instability, data corruption or drive failure.
Package Includes: 1 × X1001 Expansion Board and 1 × Accessory Pack. Raspberry Pi 5, NVMe SSD, and power adapter are not included.