All items included in this mechanical setup.
1. Main Slide Base Casting: Rectangular gray cast-metal frame enclosing the internal lead screw assembly, featuring the Grumman Aircraft Engineering Corporation brass inventory tag (No. 919510) and metrology sticker.
2. Precision Lead Screw & Nut Drive Assembly: Threaded lead screw and traveling drive nut located inside the slide bed to provide smooth, linear carriage displacement.
3. Primary Lead Screw Micrometer Dial & Speed-Crank Handwheel: Large graduated perimeter drum mounted to the lead screw shaft with divisional markings and an attached metal crank handle.
4. Coarse Linear Position Scale: Linear rule/scale attached along the top face of the housing for reading coarse longitudinal displacement.
5. Cylindrical Support / Mounting Post: Heavy cylindrical steel support rod projecting horizontally from the slide housing for mounting to a lab stand, base plate, or cathetometer column.
6. Traveling Microscope Carrier / Mounting Collar: Sliding carrier clamp mounted to the internal drive nut that holds the vertical optical barrel.
7. Main Optical Microscope / Telemicroscope Tube: Cylindrical gray metal optical body housing the relay optics, bearing the Gaertner Scientific Corporation Chicago nameplate.
8. Rack-and-Pinion Coarse Focus Knob: Knurled thumbscrew knob positioned on the optical tube for adjusting optical focus.
9. Objective Lens Cell & Right-Angle Illuminator Port: Bottom lens barrel containing the primary objective optics, fitted with a perpendicular side port for auxiliary surface illumination or beam input.
10. Filar Micrometer Eyepiece Assembly: Upper rectangular housing marked Serial No. 5272-K containing the movable crosshair/reticle mechanism.
11. Filar Micrometer Drum & Fine-Adjustment Thimble: Knurled micrometer thimble with graduated drum mounted horizontally on the filar head for micro-measurements across the reticle.
12. Ocular / Eyepiece Tube Sleeve: Upper cylindrical sleeve extending from the filar housing designed to receive the ocular viewing lens.
ITEM OVERVIEW
Item Name: Precision Measuring Microscope / Micrometer Slide Assembly
(Optical Cathetometer / Linear Comparator Head)
Manufacturer: Gaertner Scientific Corporation (Chicago, Illinois, USA)
CAGE Code: 23876
Apparatus Type: Precision lead-screw linear measuring slide fitted with a
filar micrometer optical measuring microscope / telemicroscope.
2. IDENTIFYING NUMBERS & ASSET MARKINGS
* National Stock Number (NSN):
- 6650-00-920-0332 (Slide, Micrometer - Gaertner M300-series)
- Related System NSN: 6650-01-063-2667 (Comparator, Micrometer / Measuring Microscope)
- Related System NSN: 6650-00-241-0970 (Cathetometer, Precision Optical)
* Federal Supply Class (FSC): 6650 (Optical Instruments, Test and Evaluation Equipment)
* Federal Supply Group (FSG): 66 (Instruments and Laboratory Equipment)
* Slide Carriage Serial No.: 5275-P
* Eyepiece / Filar Head S/N: 5272-K
* Aerospace Provenance: Grumman Aircraft Engineering Corporation
- Property Asset Tag: 919510
- Grumman Metrology Tag: \"NOT CALIBRATED / FOR INDICATION ONLY\"
(Ref. *GC 4605, Dated 11-87)
3. COMPONENT BREAKDOWN & DESIGN
* Slide Carriage: Heavy-duty cast and ground dovetail/cylinder bed with a precision
lapped lead screw driven by a large, knurled perimeter graduated drum with crank handle.
* Vernier Scale: Dual-readout linear scale bar along the top edge paired with drum
graduations for absolute position tracking.
* Optical Column / Scope: Gaertner modular telemicroscope tube with focus adjustment
and integral objective lens cell.
* Eyepiece Unit: Precision filar micrometer eyepiece head featuring a lateral drum
micrometer with knurled thumb drive to translate an internal reticle/crosshair across
the field of view.
* Side Port / Adapter: Right-angle auxiliary port near the objective end for vertical
surface illumination or beam splitting.
* Support Post: Hardened cylindrical mounting arm designed for clamping into optical
bench carriers, magnetic lab bases, or heavy vertical cathetometer columns.
4. ESTIMATED TECHNICAL SPECIFICATIONS
* Slide Travel Range: Approximately 50 mm to 100 mm (2 in to 4 in)
* Drum Subdivisions: 100 divisions per revolution (0.01 mm or 0.001 in primary steps)
* Reading Resolution: Direct reading down to 0.002 mm (0.0001 in) via lead screw drum;
filar micrometer head reads down to sub-micron / 0.00005 in
relative crosshair displacement depending on magnification.
* Optical Magnification: Nominally 10x to 40x (dependent on installed objective & eyepiece)
* Working Distance: Intermediate to long working distance (approx. 50 mm to 200 mm+)
5. PRACTICAL APPLICATIONS & USES
* Aerospace Metrology: Non-contact dimensional verification of turbine blades, fastener
holes, precision airframe tolerances, and critical machined surfaces (historically
utilized at Grumman).
* Toolmaker / Machine Shop Inspection: Measuring fragile, elastic, or hot components
where physical contact with calipers or dial indicators would deflect or damage the part.
* Calibration & Standards Labs: Secondary linear standard verification for glass reticles,
scales, knife edges, and micrometers.
* Tooling Preset / Coordinate Setting: Setting accurate offsets on precision fixtures,
jigs, and miniature alignment setups.
6. THEORETICAL & SCIENTIFIC RESEARCH USES
* Cathetometry & Fluid Columns: Measuring liquid level changes in U-tube manometers,
mercury barometers, or high-pressure capillary tubes at a distance.
* Thermal Expansion & Creep Testing: Non-contact tracking of micro-strain and thermal
elongation of heated alloys or composites through an environmental chamber window.
* Surface Tension & Meniscus Analysis: Measuring capillary rise height to calculate
liquid surface tension and contact angles.
* Optical Bench Experimentation: Slit-width profiling, laser beam spatial characterization,
and diffraction/interference fringe spacing measurements.
* Material Deflection Under Load: Quantifying elastic bending or tensile deformation
of structural coupons without applying mechanical probe load.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.